How do you remove a alternator from a 2001 mazda tribute 6 cylinder

Question edited for clarity and spelling.
Question mode to model category.

Mazda Tribute 2001-06 Firing Orders Repair Guide

AutoZone https://www.autozone.com > diy > mazda-tribute-2001...
3.0L engine Firing order: 1-4-2-5-3-6 Distributorless ignition; Fig. Coil and spark plug arrangement-2.3L engine; Fig. 2.0L engine Firing order: 1-3-4-2 ...

Mazda Tribute

mazdabg.com https://www.mazdabg.com > 9308CH10_Mazda_Tribute
Mazda Tribute. Fig. 14: 2.0L (VIN B) Engine Firing order: 1-3-4-2 Distributorless ignition system. Fig. 15: 3.0L (VIN 1) Engine Firing order: 1-4-2-5-3-6 ... Pictures

https://www.google.com/search?q=2001+Mazda+Tribute.+Firing+order

properly called the 'alternator' Debra, there are two fuses.

Fuse Box Diagram Mazda Tribute (2001-2007)

https://fuse-box.info > mazda > mazda-tribute-2001-20...
2006 - 2001-2004: The fuse panel is located below and to the left of the steering wheel by the brake pedal.

Mazda Tribute (2006) - fuse box diagram - Auto Genius

https://www.autogenius.info > mazda-tribute-2006-fuse...
Apr 30, 2017 - The fuse panel is located on the right-hand side of the center console, by the instrument panel. Mazda Tribute - fuse box - passenger ...

..

Check for spark? Gas in cylinder? Crankshaft sensor good? Computer?

Disconnect battery , remove the driven belt,remove belt,remove wire and push in plug remove long bolt lift away from motor.

Here's the information you are looking for:

Firing order 1-4-2-5-3-6
Location:
1 - 2 - 3

4 - 5 - 6
Front of Engine

It's the only 120 amp fuse. I think they call it the FB Fuse.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

You will have to remove the valve cover to align cam's, the lobs to cylinder number one should point out at 45 deg, and set crank at TDC.Hope this helps you.

This URL has the diagram you need.
http://www.2carpros.com/car_repair_information/year/2001/make/mazda/model/tribute/2001_mazda_tribute_drive_belt_routing_diagram.htm

#1 cylinder is on the back of the motor first one to the ritght. On the driver's side. the cylinders go 1,2,3 fromright to left on the back of motor as stand facing the vehicle and 4,5,6 left to right in the front of the motor as you face the vehicle. Hope you understand what I'm telling you.
Good luck,Dan

can 't you remove the coils insted of the intake ? It is much easier.