I have a 1999 Subaru outback with ABS in it. The Abs does not activates not matter how much I pump the pedal or how had I stop. I do not have a warning light, or a error code on the OBD. What is the problem? Thanks.
Have the abs removed and checked for operation. If you press the pedal hard enough to produce a skid but it doesn't then the abs is working. Under heavy braking from speed you will get a pulsating feeling in the pedal as the brakes are released and then re applied very quickly. If you are finding that no mater how hard you press there appears to be no assistance to brake then the problem will be in the booster and not the ABS.
SOURCE: abs light on, cruise control and engine light 2007 subaru outback
55
EGR Temperature Sensor or Circuit
ABS light is nothing to do with code 55 separate fault circuits.
Under dash there are two wires with mini spades at the end, connect one of them to the single black multiplug in position 2. Thats RHS plug inlet when you hold plug with tab lock on top.
ABS sensor should then flash up error coded. Ignore code 11 thats a initial flash to let you nknow the difference between a fast and slow flash.
Let me know what code flashes up and I will tell you the symptom,
Dan
SOURCE: error code 55 on 2007 subaru outback
car threw a CEL at me with ER 55 and blinking cruse. the error code went away after a 5-6 restarts,dont worry it´s not a serious proplem.
SOURCE: i have a subaru legacy outback, abs light comes on
one of your abs sensor is bad or the abs motor,go to local shop to diagnose which sensor,shop usually charge $ 60 to diagnose abs system,good luck, let me know ..
SOURCE: abs light is on also after my mechanic changed
maybe its just a slack wire that needs repluged
227 views
Usually answered in minutes!
×