Air bag light is on how to turn it off - Pacifica Chrysler Cars & Trucks

Why would the dealer unhook the air bag light ? Turn the key to the on position ,is the air bag light lit ? That would be ******* for the deal to disable air bag light . An besides ,there is no buzzer for a non working airbag light. So take it back to the dealer.

Air Bag Warning Indicator The instrument cluster is hardwired to the restraint control module (RCM). If an air bag system concern is detected, a diagnostic trouble code (DTC) is logged, and the RCM provides a ground path to the instrument cluster, turning on the air bag indicator

If there is a problem with the airbag system a DTC- diagnostic trouble code would set

Restraints Control Module Diagnostic Trouble Code (DTC) Index DTC Description Action B1869 Lamp Air Bag Warning Indicator Circuit Open Go To Pinpoint Test N . B1870 Lamp Air Bag Warning Indicator Circuit Short to Battery Go To Pinpoint Test N . All other DTCs - REFER to Section 419-10 .

Air Bag Light Flashing, How to diagnose and fix - YouTube

? 4:30
https://www.youtube.com/watch?v=FiO9wUb9FV4
Jan 21, 2014 - Uploaded by ChrisFix
Airbag light on or airbag light flashing? ... My 05 Elantra's air bag light flashes 5 or 6 times, then turns off and the Passenger Airbag Off light ...Missing: saturn ‎vue

50 Complaints: 2007 Saturn Vue Air Bags Problems

www.carcomplaints.com/Saturn/Vue/2007/seat...air_bags/air_bags.shtml
The 2007 Saturn Vue has 50 NHTSA complaints for the air bags at 63389 miles ... I started my car and the drive side air bag light came on no blinking just on.

Hey Earl, what's going on ? The air bag module is usually under the passenger seat or the center console ! The only way to turn off the light is with a up grade scan tool , not code reader. An the light is on for a reason , problem with the system ! If you don't know about this don't mess with it , you could deploy an air bag !
The AIR BAG indicator, located on the instrument panel cluster (IPC) is used to notify the driver of SIR system malfunctions and to verify that the SDM is communicating with the IPC. When the ignition is turned ON, the SDM is supplied with ignition 1 voltage and requests the IPC to flash the AIR BAG indicator 7 times. While flashing the indicator, the SDM conducts test on all SIR system components and circuits. If no malfunctions are detected the SDM will communicate with the IPC through the class 2 serial data circuit and request the IPC to turn the AIR BAG indicator OFF. The SDM provides continuous monitoring of the air bag circuits by conducting a sequence of checks. If a malfunction is detected the SDM will store a diagnostic trouble code (DTC) and request the IPC to turn the AIR BAG indicator ON. The presence of a SIR system malfunction could result in non-deployment of the air bags. The AIR BAG indicator will remain ON until the malfunction has been repaired.

Be careful. You do not want the air bag to deploy on you suddenly. Check the air bag fuse on the vehical, it may need to be replaced. If your air bags have been deployed recently, the lights do not turn off until the dealer turns them off for you.

With the air-bag light permanently on, you will need an expert to check the air-bag sensor to confirm if it's gone bad.

You may not be able to turn the light off because it requires that the error be corrected then the light goes off by itself.

There are special/ dedicated tools for handling this issue.

Good luck and thanks for using Fixya.

There are no ways to turn off the air bag light except you replace the faulty air bag.

Talking from experience too.

Take care. And rate this please.

If the air bag light is flashing- that means there is problem with your SRS air bag system. It stored a code in the computer and wont turn off untill the problem is fixed or cleared manualy with a scan tool- note if you choose to clear the code and turn off the light with a scan tool- if the problem with the system is still there the computer in your car will notice it and store another code and the light will come right back on. also Note that if the air bag light or SRS light is on while driving that system is shut down and your air bags WILL NOT go off if you get into an accident. (the same rules apply if your ABS- anti lock brake light is on- the ABS system will not work) the most common problem with the Altimas and air bag codes are the clock spring assembly located behind your steering wheel- (not the air bag itself on the steering wheel) but there is a round thing that turns with a wire connected to it. you have to remove the steering wheel to service. Best bet - go somewhere that has a scan tool and read what code the computer stored. It will tell you what part of the system has the problem.

To manually check air bag codes, turn the key On and push the driver's door switch (at the bottom of the B-pillar) 5 times or more within 7 seconds of turning the key ON. Then watch the air bag light flashing codes. The air bag light will come ON for 3 seconds and then give fast flashes if there is a code. Count the fast flashes as the code. So the air bag light on for 3 seconds and then 8 flashes is a code 8 for the passenger air bag circuit. after counting code clear codes and see if they come back

When the light is on all the time there is a problem in the air bag system. This is something you will want to take to a service center soon, as long as the light is on the air bags will not deploy in an accident.

Passenger Air Bag Deactivation (PAD) Switch
The passenger air bag deactivation (PAD) switch:

• is located on the instrument panel to the right of the climate controls.
• contains a light emitting diode (LED) that indicates when the PAD switch is activated (passenger air bag disabled).
• allows the passenger air bag deployment circuit to be disabled using the ignition key.
• should be used whenever a child safety seat is being used in the front passenger seating position.

------------------------------------------------------------------------------------------
Prove Out the System
Prove out the system means to turn the ignition switch from the OFF to the RUN position and visually monitor the air bag indicator with the air bag modules installed. The air bag indicator will light continuously for approximately six seconds and then turn off. If an air bag supplemental restraint system (SRS) fault is present, the air bag indicator will either:

• fail to light.
• remain lit continuously.
• flash.

The flashing might not occur until approximately 30 seconds after the ignition switch has been turned from the OFF to the RUN position. This is the time required for the restraints control module (RCM) to complete the testing of the SRS. If the air bag indicator is inoperative and an SRS fault exists, a chime will sound in a pattern of five sets of five tone bursts. If this occurs, the air bag indicator will need to be repaired before diagnosis can continue.
----------------------------------------------------------------------------------------
Active Commands
This command allows the technician to verify operation of the air bag indicator, passenger air bag deactivation (PAD) lamp and chime. When the air bag output command is executed, the indicator, the PAD lamp, chime and the chime are activated simultaneously for approximately four seconds. All devices are deactivated automatically.