SOURCE: range shift inhibed display truck wont move
you can get the part you want from international truck dealer they are a warehouse for allison. it is gear selector switch it will cost you around $55.00
SOURCE: 2001 dodge ram 2500 diesel with 6spd manual trans.
p0562 is System voltage low
p0237 is Turbo/supercharger boost sensor A circuit low
cannot find a code p1698 but did find a p0698
p0698 is Accelerator pedal position sensor supply voltage to low
SOURCE: 04 2.7 intrepid wont start .p0344 p0700 p0562
P0344 Camshaft Position Sensor Circuit Intermittent
P0700 Transmission Control System Malfunction
P0562 System Voltage Low
I would start with the P0562 issue. Check the battery voltage - it should be at a minimum of 12 volts (DC). You can try charging the battery with a trickle charger overnight and if the voltage does not come up to 12 volts then you should replace the battery. If it comes up to 12 volts then try starting it up if it starts you should get the alternator checked out at a garage. A simple alternator check is measuring the voltage at the battery you should get between 13.2 to 18.2 volts when the vehicle is running. The low voltage may be the cause of the other two codes. If not the P0344 indicates you may need to replace the sensor or if the timing slipped you may need to replace the timing chain / belt. The P0700 could indicate a low fluid condition or it may mean take it to a transmission mechanic.
SOURCE: Hyundai Accent 2005, P0562 error
562 is a low system voltage code. as in the cars computer is not "seeing" a high enough voltage.
SOURCE: I have an 1999 ford
P0344 = cam position sensor error
P0603 = Internal control module keep alive memory error.
P1670 = communication error between PCM and IDM
P0562 = system voltage low
My guess is you probably have some wiring issues but it's hard to tell exactly where.
835 views
Usually answered in minutes!
×