My blinker stopped working in my 1998 Chrysler Sebring lxi, but the hazard lights still work so I think it's a fuse, I just don't know which one or how to fix it.
There is 2 different flashers. One flasher for the turn signals and one flasher for the hazards. If you turn on the turn signals and the turn indicator on the dash lights up but doesn't blink, then most likely it is the turn signal flasher that is bad. Good luck.
My son took out a fuse that turned off my signal because I was having problems with one of my signals not working and the right flasher only blinked . when he took the fuse out I thought he removed it from under the Hood somewhere. He handed me a red fuse #10 and it stopped the blinker from flashing. He doesn't remember doing that. Once I noticed the fuse he gave me was blown I bought another and went under the hood to replace it .There were no empty spaces to put the fuse. I need help locating where this fuse came from I have a 1998 sebring
I have the same problem and i checked all the fuses and they are all fine i think the flasher is bad and i dont know where its located. the only way to find a bad fuse is to check all of them until you find it.
1,278 views
Usually answered in minutes!
blinkers, hazzard lights and radio stop working.All fuses were good.
×