Question about Land Rover Discovery

Open Question

Where is the flasher relay location on a 1998 land rover discovery

I need to find which relay controls my turn signals and my hazards. I cant find any clear diagram of what each of my relays controls

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
wilsodfarm

Donnie Wilson

  • 986 Answers

SOURCE: 1998 Dodge 2500 pickup turn signals, hazards

There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you

Posted on Oct 08, 2009

Ad

nwcricket

  • 1 Answer

SOURCE: Flasher Relay location- 1998 Mazda B3000 pickup 4x4

On my 2000 Mazda B3000 it's up underneath the dash right by the steering column, like they said, blue plastic square relay

Posted on Apr 07, 2010

alsdisco

  • 1 Answer

SOURCE: Land Rover Discovery TD5 1999. Where is the Fuel Relay Switch

In the engine fuse box under the bonnet ,relay is the closest one to the front of the vehicle ,about £7 to replkace

Posted on Jun 09, 2010

techbuster

INDIRA KUMAR

  • 5081 Answers

SOURCE: Location of Relay-Fuel Pump Land Rover Discovery

Behind right hand trim kick panel located on the top right hand side...

Check this picture alsoeaf8b18.jpg

Posted on Sep 30, 2010

richochet

  • 1026 Answers

SOURCE: where is the turn signal relay for the 1994

if you turn on each item you should hear or feel them working

Posted on Oct 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1998 ford windstar mini van


do your signals work ? listen when signal is on the (clicking noise) when you find that flasher relay is next to it.

Aug 29, 2014 | 1998 Ford Windstar

1 Answer

1998 land rover discovery starting itself


The relay is on the starter itself, its the smaller round object that actully has the wires from the battery run to it. Sometimes they will stick connected, causing it to start as soon as you turn on the key. If you have had the wires off, you may have put the main hot wire on the wrong side of the relay.

Dec 05, 2013 | Land Rover Cars & Trucks

1 Answer

98 LAND ROVER DISCOVERY TURN SIGNALS DON'T WORK


did u check the fuses?? if it ain't the fuses,you have a open ground somewhere.

Feb 03, 2012 | 1998 Land Rover Discovery

1 Answer

No turn signals or hazard lights


fuse blown or relay needs replaced.common fault on older landrover,first check all corner bulbholders for a short ie live touching earth/common,then check for a faulty wire also common on this model ie damaged wire touching body,if all ok go back to fuse.adrian,,,

Oct 29, 2010 | 1994 Land Rover Discovery

1 Answer

How to replace a fuel pump for a land rover discovery 1998 crawsherry @yahoo.com


first disconect fuel lines then drop the tank down on the ground fuel pump is on the top pull fuel pump out drop new one in,need to change fuel pump relay when replaceing fuel pump relay is under hood in the fuse box.

Jul 31, 2010 | 1998 Land Rover Discovery

1 Answer

1998 taurus - turn signals were working - pushed the hazard lights button - hazards did not work and also now turn signals do not work


Check the fuse/relay panel for a blown fuse/relay. Also look at the turn signal flasher and the four way flasher located in fuse/relay panel for problem. If the fuses are good replace the flashers to correct the problem. Hope this will help you.

May 20, 2010 | Cars & Trucks

2 Answers

I need a fuse panel diagram to replace the turn signal flasher. Thanks


Before replacing the flasher does the hazards work, Try wiggling the turn signal lever up and down and back and forth with the key on and the lever in each position. If the blinkers or hazards start flashing you'l need a multifuntion switch. This isnt a definative test if you get nothing you may have a blown fuse. As fas as the flasher goes, go buy one and then you will know what it looks like.

Jul 14, 2009 | 1998 Jeep Cherokee

2 Answers

Where is my falsher relay located? I have a 1998 Toyota Camry CE. HELP!


With your key on give a left or right turn signal. Try to listen and pinpoint the clicking of the turn signal flasher. Once you locate the turn signal flasher, your hazard flasher will look just like this and should be mounted nearby, typically next to it. The flasher simply pulls out and the new one just pushes in

Jun 12, 2009 | 1998 Toyota Camry

1 Answer

Electrical


Have you checked the flasher relay. It should make a ticking noise when using the indicators or hazard lights.
This could be your problem
good luck

Jan 25, 2009 | 1997 Land Rover Discovery

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...