Do not know vacuum hose locations---need diagram.

Hi William,here's a link to your vacuum diagram. Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

Nancy, There should be a vacuum hose diagram under the hood of your Sante Fe, either on the underside of hood or on the radiator support. Contact the dealer and they can print it off for you also.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

VACUUM HOSE V6 SOHC SONATA 91MY for 2004 Hyundai Santa Fe
How To Find Vacuum Leak EricTheCarGuy
2008 hyundai santa fe vacuum line routing Google Search

1999 Ford Ranger Vacuum hose diagram
Pamela, Normally vacuum line routing can be found under the hood of truck, on Rad support or on the underside of hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Ranger Engine Vacuum Hose Diagrams
Vacuum Lines The Ranger Station Forums
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

autozone.com will have vechiel repair guides at bottom of support page. its in emissions section or diagrams. possible in locations tab.

I’m happy to assist further over the phone at https://www.6ya.com/expert/christpher_f760d0f18f8eedc3

try this link
1999 Chevy 10 Vacuum Hose Routing Diagram

VACUUM LINE DIAGRAMS

There are few direct links showing exact vacuum line diagrams. I suggest you to refer the direct links.

Click the link below: -----

---------------

How to locate the vacuum leak?

http://howtobyme.blogspot.in/2012/01/how-to-locate-vacuum-leak.html

-----------------

Vacuum Hose Routing Diagram For 1995 Chevrolet Corvette Throttle Body?

http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html

------------

VACUUM DIAGRAMS For Audi A4?

http://repairhelpcenter.blogspot.com/2011/11/vacuum-diagrams-for-audi-a4.html

--------------------

VACUUM DIAGRAMS For VW Passat?

http://vwrepairhelp.blogspot.com/2011/11/vacuum-diagrams-for-vw-passt.html

-------------

Vacuum line diagram For 1996 Chevrolet Lumina?

http://schematicsdiagram.blogspot.com/2011/12/vacuum-line-diagram-for-1996-chevrolet.html

--------------

Vacuum Hose Routing Diagram For 1995 Chevrolet Corvette Throttle Body?

http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html

-------------

Vacuum diagram for Isuzu?

http://technoanswers.blogspot.com/2012/01/vacuum-diagram-for-isuzu.html

-------------

Ford 4 wheel drive vacuum solenoid working system?

http://technoanswers.blogspot.in/2012/02/ford-4-wheel-drive-vacuum-solenoid.html

------------

These will help.

Thanks.

Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

Scroll down to your model.

Sorry I don't have the diagram, but I do have a diagram of the engine and component locations. Your vacuum system is fairly simple. You have a MAP sensor attached to the air cleaner. I have pasted a picture below. It has one electrical connector and one vacuum hose that goes to the intake manifold or the throttle body.
Behind the right headlight is your evap canister. This will have a hose or line running to the fuel tank. Then it will have another hose going to the purge valve. The purge valve should be close by and it has a connector plus another hose that goes to the intake manifold.
Then you have the PCV hose that goes from the PCV valve in the valve cover to the air cleaner or intake manifold. I think yours just has a hose from the air cleaner and the rest is internal.
There is one more vacuum hose, and that is the bog one that goes from the intake manifold (or throttle body--looks to me like there are a couple of vacuum ports on the back side of the throttle body, and there may be a "T" on one of the hoses) to the brake booster. It this one was off, the engine would not run, as the vacuum draw is large. Please let me know if you cannot figure it out from these instructions and provide a picture, if you can.

MAP sensor:


purge valve:

You will need a Vacuum hose diagram to hook thes up correctly. There should be a diagram on the hood or raiator cover of the vehicle. If the diagram is missing you will have to take ALL info from your car (Year,Make, Model, Engine size, Engine code) and obtain the diagram from a dealer.

There should be a vacuum diagram sticker located somewhere under the hood that shows everything you need to know.