Question about 1996 Ford Crown Victoria

Open Question

No turn signals 1993 Ford crown victoria

I can't find the location of the flasher for the turn signal. I was told there were 2, one for the hazard lights and one for the signals. I found one flasher in the electrical box to the left of the steering colume and replaced it #225.Did not fix problem with signals. If I put hazard button in signals work.Hazard doesn't

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: hazard lights do not work

Look under the dishboard,look on the fuse box for the hazard flasher.

Posted on Jun 02, 2009

Ad
  • 234 Answers

SOURCE: '96 ford Crown Victoria....No hazard or brake light no turn sigal

Sounds like the multifunction switch. Try working the hazard switch up and down a few times to see if you get some lights to work. If so then replace the switch.

Posted on Nov 09, 2009

  • 4387 Answers

SOURCE: where is the turn signal\hazard flasher located?

it's in the auxiliary relay box behind the glove box.

13350 is base part number on flasher

Posted on Feb 03, 2010

Testimonial: "Actually found it located behind the radio mounted on a brace. Removed cover and relay pulls out. About 1" cube with 5 terminals on it."

ZJLimited
  • 17970 Answers

SOURCE: turn signal/flasher relay for 2003 Ford Crown Victoria

Hi there:
I suggest to look behind glove box, drop door all the way down (black square box).


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Aug 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of flasher on a 2006 ford e350 ecoline wheelchair van


Under the steering column on driver side by the fuse box you will see a round metal or plastic button like device when you turn the blinker on should make the blinking sound once? Keep turning it on and off until you locate the flasher? Note: there are two flashers one is hazard and the other is turn signal! Make sure your hazard flasher blinks after you unplug the turn flasher so you know you have the right one located?

Mar 29, 2014 | 2003 Ford Crown Victoria

1 Answer

Turn signal/flasher relay for 2003 Ford Crown Victoria


Hi there:
I suggest to look behind glove box, drop door all the way down (black square box).


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 03, 2012 | 2003 Ford Crown Victoria

2 Answers

No turn signals, everything else works including hazards, took the box out under the dash where i was told the relay would be, and yes theres like 6 relays but they dont come off the board....


Actually there is a relay however it is not an individual part. The turn signal relay and the hazard relay are in the LCM (Lighting Control Module). This is expensive to replace however you should test the multi-function turn signal switch first as I am having the exact same problem with my 95 Crown Victoria LX. If you go to any parts store they will tell you that it is just a relay and sell you one for the newer Crown Victoria models. However in the 95 to about 2002 models they employed the bad idea of the LCM.Good luck.

Jul 26, 2011 | 1996 Ford Crown Victoria

1 Answer

Cruise control and left turn signal does not work


this sounds like a bad signal flasher.it is located on the fuse panel under the dash on the drivers side.if you turn on the hazard flasher and look for it you will know what the signal flasher looks like as it is a separate flasher for the signals.check all the fuses as the cruise may just need a fuse.other than that you should have it checked out as the parts are expensive to guess what will fix the problem.

Apr 01, 2011 | 2003 Ford Crown Victoria

1 Answer

My 1993 crown victoria's signals are not working, my headlights and taillights all work. what is wrong and how do i fix it? i dont have alot of money and need to know how to fix this on my own.


CHECK TURN SIGNAL FUSE IN THE FUSE BOX LOWER LEFT SIDE OF THE INSTRUMENT PANEL.IF FUSE OKAY PROBLEM COULD BE THE FLASHER IN THE FUSE BOX ITS A LARGE ROUND METAL TIN LOOKING FUSE.YOU SEE IT IN THE INTERIOR FUSE BOX.IF FLASHER GOOD.TURN SIGNAL SWITCH COULD BE FAULTY.SHAKE TURN SIGNAL SWITCH WIRES CHECK FOR SHORTS.

Nov 21, 2010 | 1993 Ford Crown Victoria

1 Answer

My 1993 ford crown victoria has a bad turn signal flasher but i cannot locate it can you help


It is the silver round metal component plugged into the interior fuse panel. The emergency flasher is on the backside of the fuse panel.

Feb 27, 2010 | 1993 Ford Crown Victoria

2 Answers

My hazred lights come on but my tune signal will not


check the fuse first!! then check the flasher relay located in the fuse box under driverside of dash

Jan 22, 2010 | 1993 Ford Crown Victoria

1 Answer

Turn signals on my 99 crown Victoria are not working, i tried the fuse all ready


If all other lights are working properly (brakes, hazards and tail lights) there is a good possibility that it is a flasher unit. The flasher unit is usually near or in the fuse block and is usually a small round about an inch in diameter - can be plastic or metal covered. Grasp it firmly and pull straight out on it. There are 2 contacts at a 90° angle that fit into the board. A new unit should be under $10. To reinstall it - just align the contacts with the slot and push it firmly back into place. On most vehicles the hazard flasher unit is the same device but a separate unit. If you turn on the hazard switch and those lights are working you will be able to hear a click as it turns on and off. Once installed - activate the turn signals with the key on to see if it clicks.

Dec 17, 2009 | 1999 Ford Crown Victoria

1 Answer

Hazzard Lights on 1998 Ford Crown Victoria won't work


The hazards are on a seperate fuse to the indicators, on the inside of the fuse box cover it will tell you which fuse it is, simply replace it with one of the same rating and your hazards should work, if not come back to me

Mar 16, 2009 | 1998 Ford Crown Victoria

1 Answer

Cannot locate flasher for 1994 ford crown victoria


The flasher is the round most likely yellow but could be silver mounted in fuse panel. The hazard flasher is located on back side of fuse panel directly behind it.You can remove it and insert it in place of the turn signal flasher to see if it is bad.

Mar 16, 2009 | 1994 Ford Crown Victoria

Not finding what you are looking for?
1996 Ford Crown Victoria Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...