And this may sound like a stupid question, but how do I fill these with coolant? There is no filler cap on either. I had to replace both due to an accident damaging both which drained the fuid from them I could put some in the reservoir but is that just a drop in the bucket considering the capacity is 2 gallons US
What I used to do on the old 240's (same basic set-up) was to remove the thermostat and fill the antifreeze through the head. This ensured that the thermostat had enough fluid to operate properly.
Study the top of the radiator carefully on the top there should be a yellow cap ensure that engine is cool and turn cap to remove.pour fluid and replace cap
419 views
Usually answered in minutes!
Great can you identify the location of these airbleeds?
sorry don't have manual but there are air bleeds on this engine for refilling with coolant, suggest u contact the dealer.
there are factory air bleeds that must be opened during filling. If u do his wrong u will overheat the engine and may blow a head gasket.
×