Im trying to put back together the ignition on my Montero
SOURCE: i have a extra piece when i put the ignition switch back together
It may be difficult to find parts to fix this quickly. You can remove the lock plate and replace it with a similar thickness flat washer, then jump the neutral safety switch, replacing it with a push button. Of course it will start in any gear if set up this way, but the buton must be depressed when starting, to remind you to put it in "park" first! Still not as safe as the factory setup but it will get you going!
SOURCE: want to see diagram onputting steering colum of
come on this thing is so simple its untrue,why didnt you just cut the old lock off and put a new one on.As for the bearings just stick them back in with grease ,you should be able to get some at the bike shop ,but the bearing paths could be worn so if you can get a slighter bigger ball ?refitting is the reverse procedure to taking it apart
I HAD THE SAME PROBLEM. I TOOK THE AIR FILTER HOSE OFF THECARBARATOR AND ADDED CARBARATOR CLEANER. PUT IT BACK ON, AND WORKED. TRY THAT.
47 views
Usually answered in minutes!
×