Camshaft timing marks

SOURCE: trouble replacing timing belt ... setting timing

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/hyundai/model/sonata/1996_hyundai_sonata_timing_belt_diagram_marks.htm

SOURCE: my hyundai atos (r reg) cuts out under rapid acceleration only

hi
thanks for making contact.problem solved via another totaly free site and better inspection on my part.

SOURCE: timing marks for KIA camshaft sprokets

they point to 12 oclock

Mike Butler

• 6674 Answers
• Posted on Oct 22, 2009

SOURCE: camshaft timing mark crankshaft timing mark

Belt covers need to be on. Timing mark on crankshaft (while on compression stroke) should line up with TDC mark on cover. then Camshaft mark, needs to line up by looking through access hole of cover, and align mark on cam sprocket with pointer on inside of belt cover.

SOURCE: Hyundai atos 1.1 2004, 100,000 what parts must be replaced

if it has one, the timing belt should be done, along with a tune up. spark plugs air filter, fuel filter. etc