Battery is dead and I can't get key out of ignition steering wheel is not locked
SOURCE: Lock steering wheel...Key won't turn in the ignition
Make sure to push the brake firmly with you foot. I do this all the time.
SOURCE: unable to insert key into ignition switch
Try this pull the steering wheel as far to the left as possible and while it is in this position try to insert key. Sometimes the steering wheel lock will get in a bind and prevent the key from being inserted. Hope this helps!!!
If the wrong key was inserted it may have bent a tumbler pin,maybe try some wd-40 or similar and work it with the right key,might drop the tumbler back,,if not the whole ign. cylinder will have to be changed
SOURCE: 1996 Chevy Cav. When i put key in to ignition,
Hi Jamie,
As you turn the key, **** the steering wheel hard side-to-side. The anti-theft interlock between the ignition switch and the steering is just jammed. Happens to all cars from time-to-time, and that's the fix.
SOURCE: CTS_V won't start. Steering wheel locked
Typicaly the security system won't look up the steering wheel, try putting the keys back in and at the same time you try to start the car, shake the wheel back and forth. If this don't cure your problem, and you still feel that this is a security problem , you can try to reset it. The most common way that I know of to reset on a GM product is to turn the keyto the on postion and leave it there for 15 min then shut back off, due this three times, then try to start the car.
919 views
Usually answered in minutes!
×