Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 07, 2014

Mercedes e270 cdi goes into limp mode switch it off goes back to normal for abit

5 Related Answers

Anonymous

  • 499 Answers
  • Posted on Aug 10, 2009

SOURCE: mercedes 220 cdi 2005 wont go over 3000 revs

well the problem mostly is from
MAF sensor
so try to clean it or change it other wise check the fuel filter and fuel pressure regulator

Ad

Anonymous

  • 2 Answers
  • Posted on May 02, 2010

SOURCE: where can I find engine oil dipstick on mercedes

These cars don't have a dipstick (really!). Using the steering wheel controls you can get to a page on the computer output (middle of speedo) that will give you an indication of oil level. Sorry I don't recall exactly which page it is, but the manual explains - I'm sure you can google it. If you do a normal journey (so the engine is up to temp) and then park on a level surface and wait a few minutes you get the true reading from this function. If you ask me it's all too clever for it's own good...

Anonymous

  • 202 Answers
  • Posted on Dec 05, 2010

SOURCE: WHERE IS THE DIPSTICK AND THE OIL DRAIN NUT ON A

look for a red handle for the oil dipstick. it really depends on which engine you have.

Anonymous

  • 1 Answer
  • Posted on Sep 19, 2011

SOURCE: i need the manual book for mercedes e270 cdi avantgarde model 200

how to reset the service light on mercedes benz e270 cdi avantgarde

Anonymous

  • 1 Answer
  • Posted on Nov 25, 2011

SOURCE: 2004 E270 CDI Battery light visit workshop

I had the same problem in me 2004 cdi e270. Check the voltage going to the battery when the car engine is on. Stedy charge of 12v should be going in to the battery, if the voltage is volitale say between 11v to 14v then it your Regulator (which is attached to the backend of the alternator). You need to change alternator and then unplug all the batteries over night and re plug them back again. The problem should go away.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Mercedes benz limp mode

WHEN YOUR VEHICLE GOES INTO LIMP MODE IT INDICATES A PROBLEM THAT NEEDS ATTENTION CAN BE TRANS OR ENGINE TRY TURNING SWITCH OFF AT A STOP AND GO AGAIN WITHOUT HOTRODDING IT. THERE ARE TIMES WHEN WIPING AROUND DANGEROUSLY IT WILL GO INTO LIMP MODE.
0helpful
1answer

Automatic gearbox

IT IS GOING INTO LIMP MODE. COULD BE A TRANSMISSION ERROR. THE LIMP MODE IS DESIGNED TO PROTECT TRANS AND ENGINE FROM FURTHER DAMAGE
0helpful
1answer

How many liters of oil does mercedes e270 cdi engine take?

Mercedes E270 cdi 2004 take 6,5 litre oil wit filter thx
0helpful
1answer
0helpful
1answer

I need the manual book for mercedes e270 cdi avantgarde model 200

how to reset the service light on mercedes benz e270 cdi avantgarde
0helpful
1answer

2004 E270 CDI Battery light visit workshop

I had the same problem in me 2004 cdi e270. Check the voltage going to the battery when the car engine is on. Stedy charge of 12v should be going in to the battery, if the voltage is volitale say between 11v to 14v then it your Regulator (which is attached to the backend of the alternator). You need to change alternator and then unplug all the batteries over night and re plug them back again. The problem should go away.
1helpful
1answer

While driving along my 2005 mercedes e320cdi goes into a limp mode and I don't seem to have a turbo. Once I stop it and turn off the key and let it sit for several minutes it seems to be fine once it is...

Please describe limp mode. [email protected] Is the transmission effected, or engine performance. how long has the check engine light been on. And do you have starting issues during cold start. Ooh does this model have a ureurea system in it? An addtive to clean the catalytic system which needs to be service once a year...
5helpful
2answers

Loss of power

I have the same problem on a s320 cdi, gearbox goes into limp mode and wont rev above or kickdown, at the 1st chance i get to stop i put into park or neutral gear turn off the engine and re-start and then everthing is fine, I read that if you put a new battery on it may solve the problem, it's something to do with the voltage dropping below 10.4 volts. Then it sends a message to e.c.u. that puts your gearbox into limp mode. Hope this will work for you. MERKY
Not finding what you are looking for?

159 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...