Need the diagram for setting cam timing

Hi Jan,the markings are on the tappet cover, for the Rh side,there is 2 marks on the cover,and 2 on the cam wheel,align those 2, on the LH side,you will see a notch,there is 2,use second notch, then on the crank,you will see a notch on the cover and the gear where the belt fits on, align those and car must start up,but watch when you do the tension on the belt,mail me [email protected],if you have any probkems

Here's a link to your engine's number location.

color coded wiring diagram for distributor telstar 2.0gl 1996

I just find this diagrams (click over images for zoom)...



Fig. 4: Exploded view of the timing belt cover for the 2.0L engine



Fig. 10: Exploded view of the 1.8L (K8) and 2.5L engines timing belt cover assembly-2.3L engine is similar

Hope this helps (remember to rating this free answer and leave some testimonial comments).

Hi,
Looks like vacuum leaks and some sensors are not connected.
Re check everything again and tell us what happen, so that we could guide you better.
Thanks for using Fixya!

THE AALINEMENT MARKS ARE ON THE GEARS CAM AND CRANK JUST LINE THEM PU CAM DOWN AND CRANK UP BUT IT HAS TO BE A PERFECT MATCH

Click on the following FREE, direct Link. It has the Timing Mark Diagrams for your 1989 Mazda 929 V6.
http://www.2carpros.com/car_repair_information/year/1989/make/mazda/model/929/1989_mazda_929_timing_belt_diagram_marks.htm
Let me know if this helped.

electric pump

search for MX6 HEI conversion, should solve your problem for $50.
Ed

how do i get the timing back where it belongs on my 2006 chrysler 300 i messed with it before i realized it had marks