Question about 2000 Ford Explorer
My front heater fan would not come on this morning the rear fan worked fine this afternoon I cranked up the car and the heater fan worked fine. when I got to work tonight and cut the car off the heater fan stayed on I had to pull the fuse to cut it off
Sounds to me like a relay is stuck.
Posted on Jan 14, 2015
Sometimes,and some cars have a blower motor resistor that goes bad.Check and see if you have one,replace
Posted on Jan 06, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I would check to see if there is a short on the fan controller switch and the motor. sounds like a crossed wire, especially if it's ignoring your speed selection and running when the key is out. could be near the fuse box under the dash. the cig lighter circuit is live all the time as well as a couple others, it maybe crossing with it. I would pull the fuse panels assem down and check for crosses and shorts.
Posted on Jun 13, 2008
SOURCE: 2000 ford windstar
fuse #10 in the fuse box inside the van under the dash this fuse will be blown HOWEVER the reason the fuse is blown is your real problem
the most likely cause is the reduntant bps on the master cylinder just unplug it and the fuse should stop blowing.
you can replace it if you want.
be very carefull of leaking brakefluid on harness below this sensor if brakefluid has leaked into harness and is not attended too it can cause major problems.
Posted on Sep 03, 2008
heater valve to let the coolant into the heater core is not working the heater cluster in your dash that controls the heat might be bad. it also controls the fan and air conditioner
Posted on Dec 27, 2008
If this occurs in all positions, check fuse, check for power at the fan motor, if power in all positions replace motor. if no power at fan and fuse is good, check blower motor resistor and blower motor control switch. Replace as required
Posted on Oct 10, 2009
Tips for a great answer:
Feb 27, 2016 | Cars & Trucks
May 01, 2015 | 2000 Ford Excursion
Feb 14, 2013 | 2002 Ford Windstar Cargo
Jul 02, 2017 | 2000 GMC Yukon XL
Jan 31, 2011 | 2000 Ford Expedition
Jan 28, 2011 | 1998 Ford Explorer
Dec 30, 2009 | 2003 Ford Explorer
Nov 07, 2009 | 2004 Ford Explorer
Jun 15, 2009 | 1998 Ford Expedition
Mar 20, 2009 | 1996 Dodge Caravan
146 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: