I saw instructions for programming the factory remote keyless entry on my 2003 Hyundai XG350 as follows:
1. ACCESS ALARM SYSTEM CONTROL MODULE LOCATED BEHIND DRIVER'S SIDE FASCIA PANEL
2. ENSURE MEMORY SWITCH IS IN OFF POSITION.
3. TURN IGNITON TO ON
4. WAIT 5 SECONDS, SET MEMORY SWITCH TO SET POSITION.
5. PUSH REMOTE LCOK BUTTON TO SEND CODE TO ALARM SYSTEM CONTROL MODULE
I do NOT know where the driver's side fascia panel is (or how to remove it).
Can anyone help?
Thanks so much
Guy
This bulletin supersedes TSB# 02-90-001.
DESCRIPTION:
The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03
or newer) and Data Link Connector (DLC) Cable.
SERVICE INFORMATION:
The keyless adapter cable can be used on the following vehicles:
NOTE
SHOP MANUAL
PAGES
2004 MY Elantra
BE-73 - BE-74
2004 MY Santa Fe
BE-43 - BE-44
2004 MY Sonata
BE-40 - BE-41
2004 MY XG350
BE-46 - BE-47
KEYLESS ADAPTER CABLE INSTRUCTIONS:
and press ENTER
.
NOTE
"Release date 29. Sep. 2003" OR LATER
must appear on this scrprogram factory remote keyless entry for 2003 Hyun - 0390020d.gifte your SOL card with the latest software go to www.hmaservice.com and refer to TSB 00-00-001.
and press ENTER
.
program factory remote keyless entry for 2003 Hyun - 0390020g.gif"h_mi">
Select vehicle model and press ENTER
.
and press ENTER
.
on the Hi-Scan Pro and verify that the remote(s) are functioning properly.
and disconnect the adapter cable from the multi-purpose connector.
3,635 views
Usually answered in minutes!
×