Auto glass can be very difficult to try to fix. My step-dad used to be a mechanic, and he would mess things up every time he tried to fix anything related to the windows. Talking to somebody who specifically fixes windows will make life significantly easier. I would definitely suggest finding a glass repair company to help you out with these types of problems. http://glassunlimitedme.com/Window-Glass-Auto-Glass-Wells-ME.html
SOURCE: Ford Expedition rear brake brake replacement
The rear pads are usualy harder than the front and the harder the pads the more wear there is on the rotors Unless the rotors were worn to the point of replacement they could have had them skimmed.Being soft doesnt make much sense.Have an 03 ba falcon and only replaced our rotors after doing 125000ks The expidition is a similar beast that used the same brake system.Get the rotors skimmed and go to a slightly softer pad to extend rotor life
SOURCE: 2003 ford expedition
P0300 Random/Multiple Cylinder Misfire Detected
See all 300-series codes here: http://www.ford-trucks.com/article/idx/7/241/article/Ford_OBDII_Diagnostic_Trouble_Codes__P0300P0399__Ignition_System_or_Misfire.html
SOURCE: I have a 2004 Ford
If it's similar to those in past, you don't remove the stud, you have to push it back in at certain angle & rotate it, to lock it back in. Something tells me it's at about 2 o'clock, in push hard and turn down to rest position? I know I've had to play with some before getting it to go as it's supposed to. If worst comes to worst, stop at a body shop, it will take them about 2 minutes in most cases.
SOURCE: QUARTER WINDOW WILL NOT OPEN RIGHT OR LEFT SIDE
the motors that opperate these windows are known for sticking or going bad the only fix i know of is to replace the motors.
REMOVAL
(1) Remove quarter trim panel.
(2) Remove the bolts attaching the latch to the cab
side panel.
(3) Remove the nuts attaching the frame/hinge to
the B-pillar.
(4) Remove the glass from the cab.
(5) If necessary, remove the latch from the glass.
INSTALLATION
(1) If removed, install the latch to the glass.
(2) Center the window glass at the opening, insert
the hinge studs in the B-pillar holes, and install the
nuts.
(3) Attach the latch to the rear side panel with the
bolts. Tighten the bolts with the latch in the lock
position and pushing rearward on the latch.
(4) Test the vent window for water leaks.
(5) Install quarter trim panel.
INSTALLATION
(1) If removed, install the latch to the glass.
(2) Center the window glass at the opening, insert
the hinge studs in the B-pillar holes, and install the
nuts.
(3) Attach the latch to the rear side panel with the
bolts. Tighten the bolts with the latch in the lock
position and pushing rearward on the latch.
(4) Test the vent window for water leaks.
(5) Install quarter trim panel.
333 views
Usually answered in minutes!
×