2000 toyota corolla caliper bolt torque specs

All in this link

https://www.google.com/search?q=1990+Toyota+Corolla+1.64+cylinder+head+bolt+tightening+sequence+and+torque+specs

..

Do not torque it down. Tighten firmly and securely.

you can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered

Clutch disc and pressure plate. The bolts should be tightened in 2 or 3 steps, gradually and evenly. Final bolt torque is 14 ft. lbs. (19 Nm).

http://opc.mr2oc.com/online_parts_catalog/Engine/torque%20-%20TVIS.gif

what is the torque specs on 4afe 1.6 toyota corolla connecting rod & cylinder head

check on PDFsearch made simple by print. you will get manual on car engines

head bolt toque specs are 40-47 ft-lbs

The 98 Corolla has a "torque-to-distance" spec.

First, torque all 10 bolts to 36 ft lbs (49 NM or 500kgf-cm), in a clockwise fashion, starting with the 2 center bolts.

Second, mark the bolts with a paint mark, and then torque each of the 10 bolts an additional 90 degrees.

Hope this helps, and thanks for choosing FixYa.

Looks like Corolla and Echo have the same spec. 76 ft-lb.