1995 Subaru Legacy Logo

Related Topics:

A
Anonymous Posted on Dec 23, 2013

95 Subaru legacy fog lights don't work, fuse good. High beams on regular lights don't work. Connected?

High beams work if pulled toward driver and held on

4 Related Answers

Anonymous

  • 132 Answers
  • Posted on Mar 26, 2009

SOURCE: Low beam headlight is out, doesn't look like a fuse

Check the Headlight Switch. If your headlights come on automatically check the headlight sensor and its associated relay.

Ad

Anonymous

  • 127 Answers
  • Posted on Oct 03, 2009

SOURCE: headlight low beam

Test to see if you have voltage at the bulb connector in low beam position. I'd almost bet that if there is no voltage there for the low beams that you have a bad high/low switch.

Anonymous

  • 334 Answers
  • Posted on Dec 31, 2009

SOURCE: fog lights and high beams work, but not the low beams

most likely the hi lo switch

ourhowse

Dar

  • 2007 Answers
  • Posted on Mar 20, 2010

SOURCE: My 2001 Subaru Legacy's driver side headlight

Change the bulb. It's a high/low bulb, and the low side is burnt out.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2006 subaru low beams won't get brighter than daytime lights

check the fuses for the low beams they are in the under hood fuse box. I have had cars with poor grounds and a bad headlight switch too
0helpful
2answers

GMC Envoy 2003 SLT only the parking lights and fog lights work. The low beam and high beam don't work. Please help

Well, the problem is that I dont know the reason, you should investigate. There could be issues with lamps (must get new) or electricity problems (must head to auto-service)
0helpful
1answer
1helpful
2answers

Hi I have a 1997 for f150 I have no high or low head lights

check the fuses first, no luck replace the day time running light module.
0helpful
1answer

2002 BMW 330XI, high beams do not come on fully when switched to on. Momentary on then off. But they do come on when you flash to pass. low beams and fog lights work good. Any help would be cool! Thanks

check fuse and relay, if its good, than you have faulty switch, only work on low but not high beam, to turn high beam on the switch move forward which is fauty or no contact, flashing high beam move toward you which has a good contact and working. it two switch in one unit.
1helpful
2answers

1994 Mercedes c280 high beams not working...

At first 1994 C280 high beams began to not connect regularly when stick pushed forward, then not at all. Drove high beams by pulling and holding stick back towards steering wheel until that stopped working, too. Shop said the turn signal switch was at fault-- had seen it many times before with W202; about $160 to replace. Haven't done it yet, but should be an easy fix?
0helpful
1answer

High beams and fog lights will not work

I wanted to know how to change the h3 bulbs in my fog lights in my 2003 subaru legacy.
Not finding what you are looking for?

55 views

Ask a Question

Usually answered in minutes!

Top Subaru Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...