Transmission for 1988, 350, conversion van

www.car-part.com has a built in Hollander interchange and should list all available interchange transmissions.

This 4.3 V6 is just a 350 V8 with 2 cylinders missing and even a V8 trans will fit/interchange physically being the same bolt pattern and size. If it's the same shift pattern and both transmissions are overdrive transmissions, yes, it will interchange. If it's GM, it'll swap. From 1988 the automatic transmissions have a multi bolt pattern and Pontiac, Caddy, Olds and Chevy, all will bolt up.

I suggest www.car-part.com the site has a built in Hollander interchange. If you put in what part you are looking for, it will tell you all parts that show to interchange and you can search by distance and find parts close to you.

https://www.google.com/search?q=cig+lighter+fuse+panel+on+92+gmc+half+ton&biw=1361&bih=650&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwj_--aUpbvQAhUE4yYKHTvTBg4QsAQIKw#tbm=isch&q=Where+is+the+transmission+fuse+in+1995+chey+corvetion+van

Hope this helps

The converter will most likely fit on the transmission input shaft; they are fairly consistent among a brand. The issue is the diameter and depth of the converter may cause clearance issues in the transmission bell housing depending upon whether you are trying to reuse the larger or smaller of the two.

No the bell housing is different on the transmission whether it is a stick shift are automatic trans, Chevy and Dodge will not interchange unless you use a Chevy transmission as well . So don't waste your time just rebuild the Dodge 230.

They it was brake !!

What does all that mean?

You were told the problem already ?

Here's a link to your bad switch. Repair Guides Automatic Transmission Back up Light Switch AutoZone com

You can get this answer from the guys at your wrecking yard.

700 r4 same tailshaft as 4l80 e . Also you can use any turbo hydramatic if you modify driveshaft