Your positive the red wire goes on the big bolt of your starter - You should have two smaller wires - One is from the distributor and the other is from the igniton. Hook these two wires up the same way you took it off. If you are not sure of how the wire came off and should go back buy a Chilton - It is not like re-wiring a light switch and it won't turn on if it isn't connected correctly - This could mess up your car if it isn't wired correctly!
Fig. Fig. 9: Disconnect the negative battery cable
Fig. Fig. 10: Remove the three starter mounting bolts
Fig. Fig. 11: Remove the battery positive cable nut from the starter and remove the cable
Fig. Fig. 12: Remove the three bolts attaching the starter to the engine
435 views
Usually answered in minutes!
×