My master door lock switch does not lock the drivers side door but does lock all other doors. I have tried it with the door open and sitting inside the crv with the door closed. When I push down on the door tap it will lock and the other doors will lock as well. I have tried it with the door handle pulled and it still won't lock with the switch. Will replacing the door lock actuator correct this problem or is the a Honda thing - I have heard Honda designs their locking system so you won't lock your keys in the car. Thank you
SOURCE: 2001 Honda Civic door lock
If there is nothing jammed in the barrel, you will need to pull apart the lining of the interior of the door, disconnect the power motor for that switch, then see if it locks by key, sounds like the motor is seized, of out of allignment, easily fixed with a second hand or reco motor, or witha simple adjustment. Good luck, hope it helps.
SOURCE: Drivers Door Lock Problem
You will probably need to replace the power door lock actuator.
Here's a link to one similar to yours.
http://autorepair.about.com/library/a/1g/bl467g.htm
You can probably get a used one from a salvage yard.
Try this site to find one near you:
http://car-part.com
If you need more help post a comment.
Tim
SOURCE: Honda Accord Outside handle broken and Child lock is on.
Remove the panel and disable the child lock or some cars have an option to just bypass the child lock either or
SOURCE: 2003 Honda Pilot Door locks not working
may be a relay switch, or a faulty wire on the right side behind the glove box
SOURCE: My 2003 Honda CRV ...drivers side door does not
you may need to replace the door locking actuator, they do tend to go bad over times. does the driver side door lock automatic when using the lock button on the driver side. if you can lock and unlock the driver side door with a switch, my guess would not be the locking actuator, it might be in the remote locking module.
Testimonial: "Thanks for the help. everything relates back to the actuator.."
728 views
Usually answered in minutes!
×