Reset oil change indicator on BMW 525 2006

2010-2015 BMW X1 Service Oil Light Reset: 2010 2015 BMW X1 Service Oil Light Reset


Scroll down page on the above link to 2010-2015 BMW X1 for instructions.

You can find the oil life monitor reset procedure here
Oil Change Light Reset BMW 330xi 2001 2002 2003 2004 2005 Reset Your Oil...

BMW insp. reset

- Iginition OFF (POS 0)

- Press and Hold the trip odometer button while turning key to position 1 (ACCESSORY)

- Keep the button depressed (about 5 secs.) until you see "Oil Service" or "Inspection" with "Reset" or "Re" in the display

- *Note: On vehicles with "High" cluster, you will also see the amount of fuel (in litres) remaining until next service

- Press the button again and hold for approx. 5 secs. until "Reset" or "Re" flashes

- While the display is flashing, briefly press the button again to reset the Service Interval. After the display has shown the new interval you should see "END SIA" for about 2 secs.

Note that if the "Reset" or "Re" does not flash, then you have not met the minimum consumption level and cannot reset.

3 choices: A) Dealer B) Specialty Shop OR C)Buy the rest tool from Bav.Auto.com
Many a BMW owner owns the reset tool, especially if you do a bunch of your own maintenance.

nothing they did not reset oil change light, it is programmed to come on at a specific interval. take it back to dealer and have them reset light

Try this procedure and let me know if it does not work.

1. Ignition key in the "Off" or "0" position.

2. Press and hold the odometer button and turn the ignition key to the "Accessory" or "1" position.

3. Keep the odometer button pressed in until you see the following words in the display, "oil service", or "inspection" with "reset" or "re".

4. Press and hold down the odometer button again until "reset" or "re" flash.

5. While the display is flashing, press the odometer button again briefly but do not hold it down this time to reset the service interval indicator. After the display has shown a new service interval then "END SIA" should appear in the display for two seconds.

If the procedure fails the first time then repeat the procedure and it should clear the service interval indicator.

With the key in the ignition but in the off postion press and hold your odometer trip button in then turn your key to the first postion hold the trip button in for 5 seconds the display will read oil service or inspection then it will say reset release the button and then press it again untill the reset starts to flash then release and press the button briefly to reset

1. Key in 0 or off position.

2. Press and hold odometer button and turn key to 1 or acc. position... like you're turning the car on, but don't crank the engine.

3. Keep button pressed until any of the following words appear in display: "oil service" or "inspection", with "reset" or "re". For vehicles with "high cluster", the fuel amount (in litres) remaining until next service is displayed (i.e. 3224).

4. Press and hold button again until "reset" or "re" flash.

5. While display is flashing, press button briefly to reset service interval indicator. After display has shown new interval, the following will appear in display for approx. 2 seconds:"END SIA"

BMW insp. reset -Ingnition OFF (pos 0)
-Press and Hold the trip odometer button while turning key to position 1 (accessory)
-Keep the button depressed (about 5 secs.) imto; upi see "Oil Service" or "Inspeciton" with "Reset" or "Re" in the display
-*Note: ON vehicles with "High" cluster, you will also see the amount of fuel (in litres) remaining until next service
-Press the button again and hold for approx. 5 secs. imto; :Reset" or "Re flashes
-While the display is flashing, briefly press the button again to reset the Service Interval. After the display has shown the new interval you should see "END SIA" for about 2 secs.
Note that if the "Reset" or "Re" does not flash, then you have not met the minimum consumption level and cannot reset.
2001 up to 2003 for shure don't know about any other models, where i found this it said 2001 to current but not shure when it was posted. Thanks

HI NO NEED FOR HI TECH GIZMOS HERE ARE YOU SITTING COMFORTABLE....IGNITION IN OFF POSITION, PRESS AND HOLD MILEAGE RESET BUTTON ,TURNING THE KEY ONE CLICK STILL HOLDING IN THE BUTTON.HOLD FOR ABOUT 5 SECONDS TILL YOU SEE OIL SERVICE OR INSPECTION WITH RESET OR RE IN THE DISPLAY,PRESS THE BUTTON AGAIN ROUGHLY 5 SECONDS UNTIL RESET OR RE FLASHES,WHILE THE DISPLAY IS FLASHING PRESS BUTTON AGAIN VERY BRIEFLY TO RESET THE SERVICE INTERVAL.AFTER THE DISPLAY HAS SHOWN THE NEW INTERVAL YOU SHOULD SEE (END SIA)FOR ABOUT 2 SECONDS AND THERE YOU GO JOB DONE IT WORKS ON MINE EVERY TIME I HOPE THIS HELPS,,,,,,,,,, WELL OFF YOU GO YOUVE GOT MONEY TO SAVE ;-)