After an ice storm, I broke the medal knob that attaches to the handle and I need to replace it. How do I do that? Where do I get this part? Please help.
Most auto parts stores will have replacement handles. Getting to the 'C' type retainer isn't easy. Usually I just use a long shafted flat screwdriver, pushing it between the door panel and the arm of the crank handle as I look for one of the ends of the retainer. Push slightly on one side, then the other of the retainer. The retainer will pop off and then the handle will easily slip off. Re-installing the retainer will require long nose pliers. Rotating the handle so the arm is pointing up will make this job easier.
Hope this helps!
Testimonial: "Thank you. However the handle is not really the problem (I think?). My handle is intact and I have all of its parts, in fact, the handle is off and is currently lying in my passenger seat. I am sorry I was not clear before. What's broke is that little metal knob sticking out from the door that the handle attaches to that drives the window up and down when turned. What is that part called? How can I get a new one? Could I replace that part with the same part from one of my other three windows I don't use?"
Thank you. However the handle is not really the problem (I think?). My handle is intact and I have all of its parts, in fact, the handle is off and is currently lying in my passenger seat. I am sorry I was not clear before. What's broke is that little metal knob sticking out from the door that the handle attaches to that drives the window up and down when turned. What is that part called? How can I get a new one? Could I replace that part with the same part from one of my other three windows I don't use?
×
SOURCE: find the pcv valve on a dodge neon 1996
When facing the engine compartment, the pcv valve will be located on the right end of the valve cover. It threads into the cover and will have a rubber hose attached also.
Any further problems, give me a shout.
SOURCE: how replace driver side door handle-have replacement 1996 LS400
view this link
http://www.lexls.com/tutorials/body/fdoorhandle.html
SOURCE: Need to know if a 1996 dodge neon with manual
Yes it can. So long as the front wheels are perfectly straight and secured in this position and I don't mean secured with the steering lock as that will most likely break when your car hits a pot hole. Also, by towing with all wheels, you're adding extra mileage onto your car because the speed sensor is built into the front wheels (this amount will be considered negligible).
SOURCE: Recliner Handle for 2005 Chevy Colorado
I paid $18 at the dealer for just the knob. Then I found it online here for $4.70
http://www.trademotion.com/partlocator/index.cfm?action=getJointLocator&siteid=214858&chapter=&Sectionids=0,51873&groupid=2673&subgroupid=3936&componentid=3609&make=6&model=Colorado&year=2005&graphicID=GD04565&callout=15&catalogid=2&displayCatalogid=0
SOURCE: shift cable broke on 98 dodge neon. how do i
A good shop manual will show how to do!
I had the cables replaced when the clutch was replaced as the bushings were worn causing
hard shifting!
59 views
Usually answered in minutes!
×