At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you need back to the timing belt and re_check the marks for the timing belt this are on the camnshaft and cranck shaft put on the EXACT position .I think is all what you need if is not explain with more details tnk.
The Ballancer Belt runs the ballancer shaft which was installed in the motor from factory to help offset vibrations in the motor or counter ballance for the engine to run smoother
why do you thin that, hondas are a zero tolerance engine so damage will likely occur, when was the timing belt done, they should be done no later than 100,000 miles.newer cars 60,000 miles
For the V-6 model, the dipstick is located down low on the transaxle, on the drivers side of the car, if it is low, usually 1 pint of of fluid is needed to raise from low notch to high notch. also if it appears to be dark or burnt, smells burnt, you should replace the tranaxle fluid. Good Luck!
look in the owners manual and under maintenance it should tell you when to check or change this. Also you can call a Honda dealer and they can advise you of the right time to change just ask for the service department and ask the service shop foreman.
this should be it
×