Seatbelt lock reset on f-150 pick up

Seatbelt or radio code?

Check for something stuck in the female end or where it plugs in, if it is clean then you will likely have to change it.

If you need further help, reach me via phone at https://www.6ya.com/expert/john_411a7faba7ce8217

When a seatbelt locks up it is usually due to dirt or corrosion in the automatic locking mechanism. The mechanism can't release because it is under tension. If you get into the cover that houses the release mechanism for the seatbelt, you may be able to hit it with a little wd-40. You do have to release that tension so that the lock will spring back to the open position and allow the seatbelt to retract. Try the lube. Sometimes the galvanized coating on the internal parts causes a seize.

You can't unlock the seatbelts. They have an explosive charge built in that goes off like an airbag, locking up the belts on impact. You will have to replace all your locked up seatbelts.

Sounds as if the seatbelt locks have deployed you will have to buy new seatbelt and possibly a new SRS control module. Recommend contacting the dealer. Very costly repair.

eremove seatbelt cover, locate the safety lock lead or metal at the bottom of seatbelt assembly, remove the plastic roto that locks , push slightly teh belt and if u think lock is release, slowly pull the belt.

That just happened to our 05 equinox. We have car seats so one of the seats was reclined just a bit. This will cause the seatbelt to lock. We took out the car seat, folded down the other seat and folded it back. It cause the locked seat to release and unfold.

Not 100% sure but a lot of dodge products have electric seatbelts that won't pull out without battery voltage. Check the underhood fuse box of a fuse marked seatbelts to see if it blown. Check your owners manual in the seatbelt section.

These seatbelts are the non-locking type. They only lock when there is a sudden change in the vehicles forward momentum.

There is a gas cylinder that tightens the belt in a minor collision, it is a one time use part it is independent of the air bag deployment system, you will have to replace the seat belt gas cylinder, that may mean a new belt assembly, not sure on focus.