Winshield washers dont work

If you have washer fluid in the contaner under your hood, then have someone listen with the hood up to see if the motor on the pump runs. If it does not run you have a loose connection usually at the washer motor or a bad fuze to the water pump. Fuse is in the fuse cluster, usually under the dash.

Bad pump, check fuse box under hood, look in owners manual

Check that a fuse hasn't blown, then check for a broken wire, should be an easy fix

sometimes either the wiper switch wiper motor or wiring if ur sure the the fuse is good

Sounds like pump alright Unbolt tank from car and pump should be screwed to bottom of tank Another way is fit a universal inline washer pump Up to you whether you want to keep your car original

can you hear the pump running.  If not check the fuses.  If you do and there is fluid.  Remove a hose from the back of the nozzle and se if fluid flows.  If so clean the nozzles with a needle as they plug up.

According to the owner's manual
fuse in location # 12 for the washer pump relay and
in the power distribution box of a 2001 Sport Trac ( PD BOX IS LIVE - DISCONNECT
YOUR NEGATIVE BATTERY CABLE) in location # 46 B is the front washer pump
relay.

try the fuse first. then try sticking a pin into the washer jets. then try having the washer fluid pump/motor replace. if those are not the case, then you need a new switch to operate the pump motor. (a whole new control column)

These days, most windshield washer pumps are mounted to the bottom of the washer fluid reservoir. Where’s that, you ask? Well, you know that spout you pour the fluid into—the one that disappears into nowhere? Well, the reservoir is actually located inside the front fender between the bumper and the front wheel. To replace the pump, you will have to jack up the vehicle, remove the front wheel and then remove the inner fender liner.