Oil light flashes intermittently but level is fine.
Change the oil pressure sensor.
SOURCE: 2004 Murano has an oil leak near the oil filter
The oil filter mounts on an oil cooler housing that has an o-ring on the block side of it. The housing is held in place by the double ended connector bolt that the oil filter screws onto one side and the other goes into the block. This should be tighten to 37 ft/lbs. prior to installation of the oil filter. It may be loose or the o-ring might need replacement.
SOURCE: TYPE AND CAPACITY OF OIL FOR MY NISSAN MURANO 2004
hello. with a new filter, add 4 1/4 quarts of oil, US measure. The type is any good quality oil, API grade SG/SH. Go to page 249 in your owner manual for more details, here is the manual in case you do not have one http://www.courtesyparts.com/pdf/2004-Nissan-Murano.pdf
please mark my answer as very helpful. thanks. Joe
SOURCE: how to turn off oil change light\r\nfor nissan
Nissan/Infiniti
Owners of many late-model Nissan and Infiniti vehicles have the unique privilege of actually setting the interval at which they would like to be alerted about changing oil. To do so:
1. Push the "MAINT" button on the main menu.
2. Select "Engine Oil" and push Enter.
3. Select "Maintenance Schedule" and push joystick right or left to select desired mileage.
4. To reset maintenance interval, select "Reset" and push Enter.
To reset the maintenance reminder, follow this procedure:
1. Push the "MAINT" button for more than 1.5 seconds.
1,067 views
Usually answered in minutes!
×