Need to tighten the serpentin belt on a 2000 grand caravan
Replace belt tensioner, also while you are in there, change the belt. if you need help, ask your local parts store when you pick up parts and they will print out a diagram for you for free. that is if there is none under the hood on a sticker showing you belt diagram. good luck
You should be able to tighten it by adjusting tensioner pulley
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
SOURCE: How to replace serpentine belt for 2000 Dodge Grand Caravan?
Mine fell off twice so far once when going through snow and other was going through rainstorm had to use jack wrench to pry down and slip on belt which was hard to do and don't advise you to try. Ok the pulley directly under the alternator and in the middle of 3 other pulleys is the one that is the tensioner. To do this right use a 15 millimeter or 5/8 socket or open end wrench, the longer the handle the better so you can get good leverage maybe you have a pipe to slide over handle. There is a diagram of the way the belt goes on under the hood. I have a 2000 Dodge Grand Caravan
131 views
Usually answered in minutes!
×