2001 Hyundai Santa Fe Logo
Posted on May 11, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Stuttering brake pedal

My 2001 Hyundai Santa Fe's brakes have been acting strange. Occasionally, say once or twice per week (I drive at least twice per day) my brake pedal's normal resistance is replaced by a stuttering feeling. If I step off the pedal and step down again the pedal feels and works as it should. Had it checked out a couple of weeks ago at the Hyundai dealership and they couldn't find anything wrong. I did get the ball joints replaced but that didn't solve the problem.. not that anyone thought it would. Any ideas?

  • 2 more comments 
  • melybel1 May 11, 2009

    Thanks both of you. I will be getting it checked out this week.
    Actually, it occurs when I'm going quite slowly. For example, at a place where I'm turning the corner, one where I don't have to come to a full stop.


  • melybel1 May 11, 2009

    Nope, steering wheel seems normal during these instances.

  • melybel1 May 12, 2009

    I don't actually know if it has rear drum brakes. It seems to happen more often after a rainfall, and also early on in a drive. Someone thought it could be that the brakes are getting wet and need time to warm up and dry in order to avoid any slippage. It doesn't seem to happen once the car has been running a while.

  • Anonymous May 17, 2009

    I have the stuttering brake pedal problem also. Mine will do it until the abs/ tcs light comes on. I think it is a sensor that has gone bad. This is the worst vehicle I have ever owned!

×

2 Answers

Ned C Cook

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Hyundai Master 3,433 Answers
  • Posted on May 11, 2009
Ned C Cook
Hyundai Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: May 04, 2009
Answers
3433
Questions
0
Helped
1438431
Points
9966

Could possibly be vacuum assist check valve is defective and you are feeling the engine vacuum pulsations. Easy ck, Inexpensive, easy replace. Good luck. If you will, let me know. please

  • Ned C Cook
    Ned C Cook May 12, 2009

    Engine manifold vacuum is highest at low speeds and pedal pressure by driver is usually very light. good luck

×

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

  • Master 4,669 Answers
  • Posted on May 11, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

Joined: Feb 27, 2009
Answers
4669
Questions
0
Helped
1847690
Points
16674

Does it seam like you only feel it at higher speed like braking for off ramps on the interstate? Does the steering wheel shake too when the pedal is pulsating.

  • Anonymous May 12, 2009

    Do you know if it is 4 wheel disc brakes or does it have drum brakes on the rear?

  • Anonymous May 12, 2009

    Did the dealer check all four brakes it sounds like a drum brake with a problem but it could also be a disc brake with an uneven brake pad or a stuck slide pin

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Before i even touch the breaks it makes a noise and when trying to stop sometimes at the stop sighns again , can i still drive my car

Had the same problem on my 2005 Hyundai Santa Fe and I made a video on the symptom, what was causing it and how to fix it. Recommend you get it fixed as soon as you can.
2helpful
1answer

How do I bleed the brakes on a 2006 hyundai santa fe

Start at rear and pump up brake pedal till hard and hold, while someone at rear releases bleed nipple, Person in car does not release pedal off the floor till bleed nipple is retightened. Repeat several times at each wheel, ensuring brake fluid never gets low in master cylinder.
5helpful
2answers

The brake lights wont turn off on my hyundia santa fe

check area at brake pedal to make sure switch is in place and the little rubber bumper is in place for the switch to push into to turn off brake lights. if all that checks ok push on switch to feel it click. you may have a bad switch.
0helpful
1answer

Abs comes when brakin on dry roads .

Pedal meant to vibrate when abs is controlling braking on slippery surface otherwise abs unit fault
3helpful
1answer

TCS ans ABS and Brake light on 2005 hyundai santa fe

There is a senor that is in the caliper they are pricey and annoying a way to try to see if its it make a soltuion of salt water, heavy salt soak the whole caliper reall good i mean real good with start the veh. back up and down the drive way then rinse it off throughly and see what thew the lights do, do this f or ll sides, make sure you throughly rinse after and dont let the salt water saty on for mor e than 10 mins. But this will fluse the senosr and clean it...Sometime resets them,,,,Sounds crazy but it works if that is the problem. Try this and let me know fro m there
0helpful
1answer

How do I bleed my brakes on my Santa Fe?

There is a bleeder valve on the top of the caliper. Have another person pump the brake (WHILE THE CAR IS OFF) until the brake is solid with pressure. Now have them continue to apply pressure by slowly turning the bleeder valve counter clockwise until you hear air or see fluid being expelled. Once the brake pedal pumper has pushed the peddle to the floor have him keep pressure on the peddle until you re-tighten the bleeder valve. DO NOT HAVE HIM RELEASE PRESSURE WHILE THE VALVE IS OPEN or air can make its way to the master cylinder. Start with the tire furthest away from the master cylinder and work towards it. I know you are thinking, "but only one caliper has air in it". This does not matter once air is induced into the brake system. Each and every caliper must be bled to maintain safety and failure to do so can cost your your life along with someone elses.

Not finding what you are looking for?

987 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...