Vw jetta 4 1.9 tdi highline cylinder head torque settings

SOURCE: VW Jetta torque setting and hub nut size????

129 ft/lbs. Per Bentley...I'm pretty sure it's a 30 mm 12 point socket.

SOURCE: I need the cylinder head torque settings

4 steps, starting from center and doing the normal pattern. 30 ft lbs, then 44 ft lbs.

3rd step 1/4 turn

4th step addional 1/4 turn. Make sure you are using new bolts.

steve morris

• 1675 Answers
• Posted on May 10, 2010

SOURCE: golf iv 1.6 8v cylinder head torque settings

hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins 2nd stage 60nm leave 5 mins 3rd stage 90 degrees leave 10 mins 4th stage 90 degrees then you are done i will try put order on here i hope this works as follows
10 4 2 6 8 front of engine back of engine 7 5 1 3 9

in that order hope this helps

Dave Sargent

• 488 Answers
• Posted on Dec 19, 2010

SOURCE: vw jetta 2007 bkd engine whatare cylinder head

I had a quick look online for these specs. according to several sites I visited, these are the correct specs.. Have fun.. 1.8L Turbo

Clifford Beard

• 1975 Answers
• Posted on Jan 13, 2012

SOURCE: cylinder head bolts torque specs for 1994 vw jetta

I hope this helps.....