Anonymous Posted on May 09, 2009

Fault code 45- how do i repair it?

1995 subaru legacy twin turbo manual wagon, the engine check light is spitting out fault code 45, acording to subaru this is the pressure exchange solenoid valve being inoperative or the sensor for it is defective, thus causing the ecu to limit performance and generally make it run like ***, where exactly is the pressure exchange valve and sensor?

junk168 May 11, 2010

Hi I have the same issue, i posted a seperate question, did you find a resolve?

It is one of two places, the differential pressure sensor is o/s/f bulkhead.

Air pressor sensor solenoid is in the solenoid/ vac box o/s/f inner wing (rhd) I think it is the second solenoid I am trying to clarify this as I do not know which is relevant to TC45. just waitin on some more info...

1 Answer

Anonymous

Contributor 2 Answers
Posted on Aug 24, 2010

Anonymous

Contributor

Joined: Aug 24, 2010

Answers

Questions

Helped

1201

Points

Hi i had that fault i found it was a small box the size of a fifty pence on the osf with a small air pipe coming from the bottom of it try a run the car then take the pipe of if its working you will see the change in the engine

og_drakon Apr 12, 2011

Can you please elaborate on this i didnt quite understand.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

How do i get ride of code FUEL TEMP SENCOR

Codes related issues have to be diagnosed & find
a problem & fix it

There is no getting rid of dash lights,MIL Lamps,
check engine lights or any resetting of things

You have a vehicle fault or failure & it has to be repaired

ALWAYS--- ALWAYS

I fail to see after 35 years of these systems, no one
knows much about their vehicles

Read full answer

Aug 13, 2014 • 1996 Subaru Legacy

0helpful

1answer

Subaru legacy boost

It sounds like a lack of fuel to the injectors. check the fuel manifold pressure and the regulator. run fault codes to check for faulty sensors.

Read full answer

Jan 25, 2014 • Cars & Trucks

0helpful

1answer

1996 Subaru Legacy GT - Twin Turbo, manual trans: started spitting a lot of white smoke out of the exhaust. It did that when the car started then seemed to be ok when in idle but when on take off and...

Expect to hear your head gasket needs replacing, at a minimum. White smoke means it's burning coolant. How much it will cost I can only guess, but usually a head gasket repair- a few hundred dollars-it's pretty time consuming and labor intensive, especially with all the turbo stuff that could be in the way. Good luck.

Read full answer

Apr 06, 2012 • 2012 Subaru Legacy 2.5i Sedan 2.5L 4-cyl....

0answers

Hi I got alegacy gt twin turbo 1995 auto the check engine light is on and the code it gave was a 63 which refers to the egr valve been faulty. It starts and idles but when you drive it it wont accelerate...

Read full answer

Be the first to answer Feb 20, 2018 • 1995 Subaru Legacy

0helpful

1answer

I have a Subaru Legacy B4 Twin Turbo 2.0ltr. It

indicates several problems
first is that the scan tool has not got the right protocols for reading the Subaru ECM as there are fuel mixture faults recorded
next check the vacuum hose to the turbo vane actuators and that the vanes are free to move
next check for loose interchanger hoses and holes in the intercooler

Read full answer

Nov 16, 2017 • 2000 Subaru Legacy

0helpful

1answer

The subaru legacy B4 trasmissions kipps the 2nd gear and does not move from gear 3 when drining on tip tronic. The check engine, abs and srs lights is always on. The car takes along time to pick speed yet...

Hi, Take it in to the repair shop it is beyond your know how. Good luck

Read full answer

Jul 18, 2011 • 1999 Subaru Legacy

0helpful

1answer

Hi, I have a '95 2L Legacy Boxer 2 stage twin Turbo. When i'm driving and the engines reving at ot just above 2000 rpm I'm getting a dip in power for a moment before it picks up again. I haven't noticed...

the 1st thing that needs to be done here is to find what fault code is turning on the check engine light, this information is absolutely crucial to making an accurate diagnosis of this problem, guessing is not an option as each part that could cause this is very hard to replace and very expensive, so get the the engine control system tested, this is what is called OBD 1 electronic engine control and requires a Subaru scanner to read code.

Read full answer

Apr 25, 2010 • 1995 Subaru Legacy

0helpful

1answer

Re-installing a twin turbo boxer engine into a 94

CHECK OUT AUTOZONE.COM FOR BOTH OF THOSE ITEMS, JOIN UP_its free and safe_AND YOU CAN DOWNLOAD THE REPAIR GUIDE FOR THIS CAR WITH DIAGRAMS.....

Read full answer

Mar 08, 2010 • 1995 Subaru Legacy

0helpful

1answer