Brakes yes rotors warped yes if the run out is more than 3 thousanths of an inch thats the RUN OUT your not suppose to cut them use new ones thats dangerous... also check your bearings and ball joints while your down there..
It is very likely that your front brake rotors (or discs) are warped. You can have a competent
machine shop resurface the rotors on a lathe (as long as they are still thick enough after the machining process to meet minimum thickness standards for safety) or you can replace the warped rotors with new ones. In both cases, I would recommend also replacing the brake pads too. Hope this helps.
Has warped or rusted brake rotors
226 views
Usually answered in minutes!
×