Check the wiring harness between the "A" pillar and drivers door. The harness usually breaks there.
This is correct. Two of the wires between door and body frame, within the rubber boot, are of heavier guage and will break over time. Peel the rubber boot from door and frame to access. May have to add more wire to splice the originals back together. And don't just tie them and wrap them in electrical tape - use connectors.
×
355 views
Usually answered in minutes!
check for power if no power, check wiring going through rubber boot between door and hinge post. You did check fuses, breakers and relays ?
×