Bluetooth reset keeps saying "system not ready please wait a moment" for the whole day. can not connect to bluetooth at all to even erase or pair or do anything with the "phone" function.

Vince Mar 14, 2016

I have this same issue. A few months ago the voice prompts disappeared, now it will not go into phone menu at all. My car is a 2013 Elantra. Help!!!

1 Answer

Rockadero

Contributor 26 Answers
Posted on Nov 19, 2013

Rockadero

Contributor

Joined: Jul 06, 2011

Answers

Questions

Helped

26332

Points

Just for fun try unhooking your negative battery cable for a couple minutes to do a reset or reboot .

5 Related Answers

Anonymous

1 Answer
Posted on May 26, 2012

SOURCE: pairing fail

hi.i have work at a hyundai dealer during 6 years and your problem is the radio.the bluetooth module in radio must be replace under warranty.if you already remplace radio maybe its your phone but most of the time its the radio

Anonymous

Posted on Aug 19, 2008

SOURCE: pairing phone

If the software has not been updated for the new type phone it will not pair . Try the device pairing from the radio menu, if this icon is there it is fitted. Range Rovers and Disco 3 have a similar system.

Anonymous

1 Answer
Posted on Oct 15, 2008

SOURCE: New Ford Galaxy 6 days

Just picked mine up today, With the same bluetooth problem.
Any fix for this? Or does it need flashed by ford ?

Anonymous

89 Answers
Posted on Feb 04, 2011

SOURCE: Bluetooth keeps aking for a pairing code. each 4

Did you try just pressing enter (no code)? If not, try "0000" I found something here: http://fordfcsd.wunderman.be/UK/Audio%20-%20Multimedia%20-%20Navigation/Bluetooth%20%26%20Voice%20control/bluetooth%20%26%20voice%20control%20%28cg3504en%29%2001-2006.pdf which indicates "0000" is the code, but enter should do it

Testimonial: "worked with an old module i have, but radio is stuck on mute wid dis one. when i insert my newer module,it dos not pair with the phones but BT show up"

Anonymous

5158 Answers
Posted on Oct 30, 2009

SOURCE: Bluetooth in Prius 2007 suddenly won't connect to cell phone(s)

unplug the fuse for the navigation/radio for about 10 minutes then plug it back in. that should reset it. before you do that make sure you know the code to activate the radio and how to enter it (if it requires a code).

if you can't locate the fuse just unhook the battery for that length of time.

please take a moment to rate this solution thanks

robert

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

3answers

I can’t download my iPhone 8 phone book into my 2012 Grand Cherokee Uconnect.

Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.

Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.

Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.

After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.

Read full answer

Jan 13, 2018 • Cars & Trucks

0helpful

1answer

My raido tells me that system is not ready

Sounds like the bluetooth for pairing a mobile phone is the problem!
Try deleting all paired phones on the radio and re-pairing.

Read full answer

Oct 16, 2016 • 2012 Kia Sportage EX

0helpful

3answers

Please someone help me. I've tried to connect to Bluetooth. I get so far along and then phone Bluetooth doesn't find the cars. Is there a fuse that might if gone? I did not get a manual with my car.

About 4,890,000 results (0.54 seconds) Search Results

How to Fix Bluetooth Pairing Problems - Techlicious

bluetooth

How to Fix Bluetooth Pairing Problems - Techlicious

bluetooth

Bluetooth FAQ for Windows Phone ' Windows Phone How ...

phone

bluetooth

iPhone 6 not connecting to car Bluetooth ' Apple Support Commu

Read full answer

Jan 27, 2016 • 2006 Ford Focus 2.0

0helpful

1answer

Cx9 bluetooth

Make yours car bluetooth visible when trying to pair with phone

Read full answer

Dec 03, 2017 • Cars & Trucks

0helpful

1answer

I have had several phones paired with my bluetooth and every once in a while, the system would seem to "reset" itself and I'd have to re-pair my phone. A few months ago, when I tried to re-pair my phone,...

Run the scanner /computer for to get easy diagnostic and fix it.

God bless you

Read full answer

Oct 30, 2013 • 2010 Mazda 3 1.6

0helpful

1answer

Bluetooth

Did you find a solution to this? I'm having the same issue with my daughter-in-law's 2012 Kia Sorento. The car pairs with her iphone, but the voice prompts don't come up .... it only emits beebs.

Read full answer

Aug 19, 2012 • 2012 Kia Optima Hybrid Sedan 2.4L 4-cyl....

0helpful

1answer

Pairing fail

Read full answer

May 25, 2012 • 2010 Hyundai Santa Fe

4helpful

1answer

Bluetooth in Prius 2007 suddenly won't connect to cell phone(s)

Read full answer

Oct 30, 2009 • 2007 Toyota Prius

0helpful

2answers

Onstar/Bluetooth voice recognition system not working.

take it to dealer, you have warranty

Read full answer

Oct 05, 2009 • 2009 Chevrolet Traverse

33helpful

6answers

HOW DO I SET UP CELL PHONE TO USE IN CAR?

OK - If you are getting the SIG instead of Phone connected in the X Type - You need to enter the code - for the 2007 X Type, the Code is ##3#*# - Which should then say waiting and finally SIG ****** which means it is connectable - To pair your phone, goto bluetooth and pair device, wait until the Jaguar is found. When prompted for the numerical code it is 1313

Read full answer

Jul 07, 2008 • 2002 Jaguar X-Type

Not finding what you are looking for?

View Most Popular

Cars & Trucks

I can’t download my iPhone 8 phone book into my 2012 Grand Cherokee Uconnect.

Cars & Trucks

21,112 views

Ask a Question

Usually answered in minutes!

Related Topics:

Bluetooth reset keeps saying "system not ready please wait a moment" for the whole day. can not connect to bluetooth at all to even erase or pair or do anything with the "phone" function.

1 Answer

5 Related Answers

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I can’t download my iPhone 8 phone book into my 2012 Grand Cherokee Uconnect.

My raido tells me that system is not ready

Please someone help me. I've tried to connect to Bluetooth. I get so far along and then phone Bluetooth doesn't find the cars. Is there a fuse that might if gone? I did not get a manual with my car.

Cx9 bluetooth

I have had several phones paired with my bluetooth and every once in a while, the system would seem to "reset" itself and I'd have to re-pair my phone. A few months ago, when I tried to re-pair my phone,...

Bluetooth

Pairing fail

Bluetooth in Prius 2007 suddenly won't connect to cell phone(s)

Onstar/Bluetooth voice recognition system not working.

HOW DO I SET UP CELL PHONE TO USE IN CAR?

Not finding what you are looking for?

Cars & Trucks

I can’t download my iPhone 8 phone book into my 2012 Grand Cherokee Uconnect.

Ask a Question

Popular Questions

No sound from speakers

I need to replace the purge valve in my 2003 Hyundai Elantra. I have the new purge valve and am ready to install it. However, I have no idea where the old one is located. I only know that it's under t

Diagram for 2002 Hyundai elantra fuse box

Location of IAT sensor in the car

What does the code p1166 mean for a hyundai

Check Out the Latest Top Trucks Report!

Top Hyundai Experts

ZJ Limited

Ronny Bennett Sr.

Thomas Perkins

Are you a Hyundai Expert? Answer questions, earn points and help others

Manuals & User Guides

Http://www.caaquebec.com/DocumentLibra...

Http://www.elantratouring.ca/dloads/El...

Http://www.caaquebec.com/DocumentLibra...