Ignition is stuck
SOURCE: 1996 toyota 4 runner 4x4 6cl key gets stuck in ignition, how do I replace ignition starter switch?
Just a thought , if the gear stick is not in park the key cannot be removed from the ignition I found out when I left the car in nuetral .
SOURCE: The ignition key is stuck in my 2001 Toyota Corolla
The ignition on Toyota cars sometimes requires you to push the key down into the keyhole while turning it towards the 'LOCK' position.
If you have trouble moving it to this position, you can try turning the steering wheel at the same time, or jiggling the wheel left and right.
In case you are still unable to remove the key, you may have a defective ignition key cylinder, and this may need replacement.
Hope this helps.
SOURCE: Need to replace the 1995 toyota corolla ignition lock cylinder
You need to pull the plastic covers from above and below the steering wheel off. Then put your key in the ignition and turn it to the acc position, then there is a small button either on the top or bottom of the tumbler assembly, it will be inset and you will need a small pointy screwdriver or something to reach it. When you push the button the ignition assembly and the key will come out together
http://technoanswers.blogspot.in/2012/02/key-wont-turn-in-ignition-on-toyota.html
-------------------
How to remove ignition switch on VW Car models?
http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html
-------------
http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html
-----------------
203 views
Usually answered in minutes!
×