- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Put a direct current to fan motors its possible the motors are knackard then its wiring fuses relays then if all else fails take it to a garage get them to diagnose it then fix it your self i do this all yhe time if im stuck lol
A code P0304 may mean that one or more of the following has happened:
Faulty spark plug or wire
Faulty coil (pack),
Faulty oxygen sensor(s),
Faulty fuel injector,
Burned exhaust valve,
Faulty catalytic converter(s),
Running out of fuel,
Poor compression,
Defective computer.
If there are symptoms
such as the engine is stumbling or hesitating, check all wiring and
connectors that lead to the cylinders (i.e. spark plugs/wires). Depending on
how long the ignition components have been in the car, it may be a good
idea to replace them as part of your regular maintenance schedule. I
would suggest spark plugs, spark plug wires, distributor cap, and rotor
(if equipped). Otherwise, check the coil packs. Sometimes the catalytic converter has gone bad. If you smell rotten eggs
in the exhaust, your catalytic converter needs to be replaced. I've also heard
in other cases the problems were faulty fuel injectors.
First thing to do is inspect wiring harnesses in the engine bay as from early 90's to 96 all wiring had a biodegradable insulation (forced to do so by US) that breaks down over time and heat to reclaim the copper. If you inspect yours and the insulation is crumbling they must be replaced as they are shorting out. Codes mean nothing till this is checked/replaced.
Hi have a mercdes e220 cdi auto 2004 having gearbox problems: Taking reverse ok and Drive but only 1st and 2nd gear and not taking manual box any suggestions what might be wrong?
×