How do you replace a timing belt

2008 kia sportage 2.0 timing belt diagram AND ...

JustAnswer https://www.justanswer.com > Kia Troubleshooting
May 1, 2019 - Install the timing belt lower cover(A) with 5bolts(B). Tightening torque : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lbf.ft). 15. Install the ...

1 answer · Top answer: Glad I can help! Please let me know if you have any further questions.

TIMING COVER REMOVAL, TIMING COVER OIL LEAK FIX ...

YouTube · Electrical Car Repair LIVE 6K+ views · 2 years ago
21:35
TIMING COVER REMOVAL, TIMING COVER OIL LEAK FIX KIA SORENTO, KIA SPORTAGE If you have Kia Sorento Sportage and you need to replace timing ...

..

parts store where you buy the belt can printout a diagram for you..this usually takes a few pages..

• Hi, I can help. Please see the diagrams below for your timing marks.

• The picture below is the crankshaft marks that need to be lined up before you remove the timing belt.

• Below is the intake and exhaust camshaft pulley marks.

• Below is an exploded diagram of the engine components in relation to the timing belt.

• Please not that this diagram is good for both 4X4 and 2X4 2.0 Engine (which is the only engine Kia Sportage had that year).

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

Click on the following Link: It has the Diagram for your Timing Belt and Marks.

http://www.2carpros.com/car_repair_information/year/1998/make/kia/model/sportage/1998_kia_sportage_timing_belt_diagram_marks.htm

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it either way.

Click on the following direct Link. It has several Diagrams you will need for your Timing Belt replacement. Included are the Cover Bolt Locations, Tool Needed and Marks for your specific engine.
You may also want to Print out these Diagrams for future use.

I would also strongly suggest purchasing a Haynes or Chilton Manual for the complete listings of all Bolt and Nut Torque Specifications. They are available at most auto parts stores for around $20-$25 dollars. It has a step-by-step instructions which would take Pages of Response in this type Forum.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...

http://www.2carpros.com/car_repair_information/year/1999/make/kia/model/sportage/1999_kia_sportage_timing_belt_diagram_marks.htm

Google it

Crankshaft match marks


Align marks on timing belt pulley and pump body.

Camshaft pulley alignment marks

1. Align marks on camshaft pulleys with alignment marks on seal plate.
2. Install timing belt. NOTE: No looseness should exist on the tension side and at the camshaft pulleys.
   
3. Loosen tensioner lock bolt.
4. Turn crankshaft 2 revolutions in direction of rotation and check that timing marks are still in alignment.
5. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm).
6. Apply a force of 22 lbs to timing belt between camshaft sprockets.
7. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm)
8. NOTE: Replace tensioner spring if timing belt deflection is excessive.

Timing Belt Installation

1. Install lower timing belt cover.
2. Install upper timing belt cover.
3. Install power steering drive belt and adjust belt tension.
4. Install fan pulley.
5. Install generator drive belt and adjust belt tension.
6. Install A/C drive belt and adjust belt tension.
7. Install splash guard.
8. Install fan and fan shroud.
9. Install 4 fan bolts. Tighten to 24 ft lb (33 Nm).
10. Install fan shroud mounting bolts.
11. Install fresh air duct.
12. Connect hose to resonance chamber.
13. Connect battery negative cable.

All the diagrams are on this page http://images.google.ca/images?hl=en&q=diagram+of+kia+sportage+timing+belts+marks&um=1&ie=UTF-8&ei=NI01So-nJZGuswOKqon-Dg&sa=X&oi=image_result_group&resnum=1&ct=title

try http://www.kia.com

go to kia .com ask for a diagram of the timing belt assy