How do you replace the oxygen sensors on a 1995 merc sable with a 3.0 ltr motor

1 Answer

gerry bissi

Mercury Master 4,390 Answers
Posted on May 02, 2009

gerry bissi

Mercury Master

Joined: Jan 07, 2009

Answers

4390

Questions

Helped

3060859

Points

11499

They just unscrew from the exhaust pipe.

Heated Oxygen Sensor (HO2S) SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Oxygen Sensor Wrench T94P-9472-A
Removal and Installation

Disconnect battery ground cable (14301). Refer to Section 14-01 .

On 3.0L (4V) engine remove cowl extension and right side of leaf screen.

Disconnect engine control sensor wiring (12A581) from heated oxygen sensors (HO2S) (9F472). Do not remove harness connectors from the brackets.

Raise vehicle on hoist. Refer to Section 00-02 .

NOTE: If excessive force is needed to remove a heated oxygen sensor, lubricate the heated oxygen sensor with penetrating oil prior to removal.

Remove heated oxygen sensors from exhaust manifolds (9430) using Oxygen Sensor Wrench T94P-9472-A.

To install, reverse Removal procedure. Apply a coating of anti-sieze compound to threads of heated oxygen sensor. Tighten heated oxygen sensors to 34-46 Nm (26-34 lb-ft).

Heated Oxygen Sensors—3.0L (4V) Engine

how do you replace the oxygen sensors on a 1995 - 4da449b.gif

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

2answers

I am replacing my break pads and can't get the piston to press back in the caliper on my 1995 merc sable.

the caliper is probably bad.

Read full answer

Sep 17, 2011 • 1995 Mercury Sable

0helpful

1answer

1995 merc sable,changed radiator thermostate, but the heater will not blow warm air.sometimes it will get a little warm but as soon as you turn ion the faqn its cold.

you might need to change the heater core...
i don't believe that the radiator thermostat has to do anything with the heater...

Read full answer

Oct 12, 2010 • 1995 Mercury Sable

0helpful

1answer

1992 merc sable wipers wont work clicking noise from behind dash when i work the switch have replaced motor with new one no help

the arms have not been hooked up correctly and have most likey fell off

Read full answer

Oct 06, 2010 • 1992 Mercury Sable

0helpful

1answer

How to remove radio from a 1995 merc sable

Check this RADIO GUIDE for Mercury Sable radio install...

Hope helps (remember comment and rated this).

Read full answer

May 31, 2010 • 1997 Mercury Sable

0helpful

3answers

1998 merc. sable I replaced bank 1 sensor 1 oxigen sensor still get code P0135 drove 300 miles to reset mil's code still there (help)

Fords are bad about vacum leaks, check all vacum hoses repair as needed.Vacum leak will give an o2 sensor code.

Read full answer

May 11, 2010 • 1998 Mercury Sable

1helpful

1answer

What is a fair price for a garage to charge to replace the speed sensor in the transmision on a 1995 Merc Sable?

speed sensor fairly cheep and easy to do if you were in ohio i could do it for aprox 50.00 or less but dont pay more than 100.00 max most diy can do it I have 29 years auto diesel experance but it is easy to

Read full answer

Apr 15, 2010 • 1995 Mercury Sable

1helpful

1answer

How hard is it to fix a front motor mount on a 1994 merc sable

replacing that motor mount is about an hours work,not too bad a job!!!

Read full answer

Nov 27, 2009 • 1994 Mercury Sable

0helpful

1answer

Can't find the part number for a small part that comes off the thermostat housing and has outlets for 2 sensors and a nipple for the heater hose 1999 merc sable "u" motor

Went to the books, found a picture of the motor and took it into Ford.

Read full answer

Oct 08, 2009 • 1998 Ford Taurus

0helpful

1answer

Starter solenoid - how to replace

Section 03-06: Starting System 1996 Taurus, Sable Workshop Manual REMOVAL AND INSTALLATION Starter Motor Removal

WARNING: WHEN SERVICING STARTER MOTOR (11002) OR PERFORMING ANY MAINTENANCE IN THE AREA OF THE STARTER MOTOR, NOTE THAT THE HEAVY GAUGE INPUT LEAD CONNECTED TO THE STARTER SOLENOID (11390) IS HOT AT ALL TIMES. MAKE SURE THE PROTECTIVE CAP IS INSTALLED OVER THE TERMINAL AND IS REPLACED AFTER SERVICE.
Disconnect the battery ground cable (14301). Refer to Section 14-01 .

Raise the vehicle on a hoist. Refer to Section 00-02 .

CAUTION: When disconnecting hardshell connector of the engine control sensor wiring (12A581) at S-terminal, grasp the plastic shell and pull off. Do not pull on wire. Be careful to pull straight off to prevent damage to the connector and S-terminal. If any part of the connection is damaged, replace the damaged components.
Disconnect engine control sensor wiring and starter battery cable from starter solenoid.

Remove upper and lower retaining bolts.

Remove starter motor.

Read full answer

Apr 09, 2009 • 1995 Mercury Sable

1helpful

1answer

Oxygen Sensors

ok Bank 1 is the rear bank and bank 2 is the front bank sensor 1 in each bank is the one closest to the manifold they have green connectors sensor 2 is the sensor after the cat converter and is a blue connector

Read full answer

Dec 01, 2008 • 2001 Mercury Sable

Not finding what you are looking for?

View Most Popular

1995 Sable

Cars & Trucks

I am replacing my break pads and can't get the piston to press back in the caliper on my 1995 merc sable.

1995 Mercury Sable

660 views

Ask a Question

Usually answered in minutes!

Check Out the Latest Top Trucks Report!

View all Fixya Reports

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for 1995 Mercury Sable? Or just drag it here!

Related Topics:

How do you replace the oxygen sensors on a 1995 merc sable with a 3.0 ltr motor

1 Answer

gerry bissi

Add Your Answer

Attachments: Added items

Related Questions:

I am replacing my break pads and can't get the piston to press back in the caliper on my 1995 merc sable.

1995 merc sable,changed radiator thermostate, but the heater will not blow warm air.sometimes it will get a little warm but as soon as you turn ion the faqn its cold.

1992 merc sable wipers wont work clicking noise from behind dash when i work the switch have replaced motor with new one no help

How to remove radio from a 1995 merc sable

1998 merc. sable I replaced bank 1 sensor 1 oxigen sensor still get code P0135 drove 300 miles to reset mil's code still there (help)

What is a fair price for a garage to charge to replace the speed sensor in the transmision on a 1995 Merc Sable?

How hard is it to fix a front motor mount on a 1994 merc sable

Can't find the part number for a small part that comes off the thermostat housing and has outlets for 2 sensors and a nipple for the heater hose 1999 merc sable "u" motor

Starter solenoid - how to replace

Oxygen Sensors

Not finding what you are looking for?

1995 Sable

I am replacing my break pads and can't get the piston to press back in the caliper on my 1995 merc sable.

Ask a Question

Check Out the Latest Top Trucks Report!

Top Mercury Experts

ZJ Limited

Thomas Perkins

Arnie Burke

Are you a Mercury Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

How do you replace the oxygen sensors on a 1995 merc sable with a 3.0 ltr motor

1 Answer

gerry bissi

Add Your Answer

Attachments: Added items

Related Questions:

I am replacing my break pads and can't get the piston to press back in the caliper on my 1995 merc sable.

1995 merc sable,changed radiator thermostate, but the heater will not blow warm air.sometimes it will get a little warm but as soon as you turn ion the faqn its cold.

1992 merc sable wipers wont work clicking noise from behind dash when i work the switch have replaced motor with new one no help

How to remove radio from a 1995 merc sable

1998 merc. sable I replaced bank 1 sensor 1 oxigen sensor still get code P0135 drove 300 miles to reset mil's code still there (help)

What is a fair price for a garage to charge to replace the speed sensor in the transmision on a 1995 Merc Sable?

How hard is it to fix a front motor mount on a 1994 merc sable

Can't find the part number for a small part that comes off the thermostat housing and has outlets for 2 sensors and a nipple for the heater hose 1999 merc sable "u" motor

Starter solenoid - how to replace

Oxygen Sensors

Not finding what you are looking for?

1995 Sable

I am replacing my break pads and can't get the piston to press back in the caliper on my 1995 merc sable.

Related Topics

Ask a Question

Popular Questions

I need a diagram for

I.P Brake light is staying on.. what does this mean

Where is O2 sensor circut bank1 sensor 2. And bank

What does the power point fuse do?

What do I need done if codes p0171 p0174 p0301

Check Out the Latest Top Trucks Report!

Top Mercury Experts

ZJ Limited

Thomas Perkins

Arnie Burke

Are you a Mercury Expert? Answer questions, earn points and help others

Manuals & User Guides