Need a diagram for a 1998 mercury tracer brake line
Instead of working on your breaks yourself it would probably be best to have a professional take a look at it. That way they can get the correct auto part you might need for replacement. Not to mention they know how to do it correctly and efficiently as well. https://www.stopmasterbrakes.com.au/services
Brake Lines and Hoses
Double-walled steel line is used in the hydraulic lines between the brake master cylinder and the front tube connector, and between the brake master cylinder and the flexible brake hose at the rear wheels.
Double-flared brake lines provide good leak-proof connections.
When replacing hydraulic brake lines, hoses, or connectors, tighten all connections securely. After replacement, bleed the brake system; refer to Section 206-00 .
The wet appearance of the outer cover of the rubber brake hose is referred to as "sweating." This is a normal condition for neoprene rayon braid hose and is not a sign of leakage or cause for replacement of the hose.
Hydraulic Brake System Components — Non-ABS
Item
Part Number
Description
1
2005
Power Brake Booster
2
2455
Brake Pedal
3
2261
Rear Wheel Cylinder
4
2552
Rear Disc Brake Caliper— (Mexico Only)
5
2B120
Disc Brake Caliper—, Front
6
2B091
Brake Pressure Control Valves
7
2140
Brake Master Cylinder
SOURCE: rear brake drum removal 1992 mercury tracer
Yes. and than the drum will come off. You will find that it will not move at first so take a hammer and tap, not slam, around the edge of the drum to brake the rust. It you have difficulty removing the 2 screws don't strip the heads. Take your screw driver and put it in the slot than tip it at an angle and hit the end with a hammer to apply force sideways to the screw. This will, in most cases, brake the rust and permit the screw to turn.
SOURCE: serpentine belt for 1998 mercury tracer
Hey there MSM,
Mike
SOURCE: i need a routing diagram for a serpentine belt
i got the car fixed. my son, who is familiar with the car, came over and had the belt on in 20 minutes. thank you for your help.
SOURCE: My brake lights on my 1999 mercury tracer will not
They're is a part called a Brake Switch right in front of your pedal. This works the opposite of most switches, as in when you press the pedal and the button is released, your brake lights come on. It's possible that it needs to adjusted or even replaced. Hope this helps.
SOURCE: I need a diagram of a how to install a serpentine
1998
MERCURY TRACER - L4 2.0L 1989cc 122ci GAS FI N P
Belt Routing Diagram / Multiple Accessory, w/A.C.
More details HERE
I hope help you (remember rated this help) Good luck.
6,819 views
Usually answered in minutes!
×