Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Nov 05, 2013

Third brake light almera

How to replace bulb

5 Related Answers

Anonymous

  • 4 Answers
  • Posted on Sep 03, 2009

SOURCE: nissan almera brake lights not working,checked

Check the brake light switch under the dash at the brake peddle and make sure its working if it does not close when you depress the brake peddle the lights will not work You may hve to remove the lower cover for the dash to get at the switch

Ad

Anonymous

  • 430 Answers
  • Posted on Sep 20, 2009

SOURCE: replacing third brake light bulb lexus 2001 es300

If you mean the 3rd as in lite on the rear dash , the cover pops off from inside the car.You must flex it it slightly from the sides or gently try to pop it with something wide , but flat like a putty knife. the bulb should be a common one

Anonymous

  • 7353 Answers
  • Posted on Sep 23, 2009

SOURCE: 1997-Ford Explorer how to replace the third brake

there should be some screws to remove and the unit will come out, then you can deterrmine the correct bulb.

Anonymous

  • 1986 Answers
  • Posted on Oct 07, 2009

SOURCE: How to change a third brake light bulb for 1993 Toyota Camry?

open the trunk and look up along the top of the bumper and you should see two screws / nuts that secure the light assembly.

Anonymous

  • 678 Answers
  • Posted on Dec 05, 2009

SOURCE: how do i replace bulb on third brake light on a

I found this step by step guide for you. It's for an 02 but should be the same for your 05.

Third Brake Light Replacement Guide

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Third brake light

stand on truck bed.the cargo lamp housing held in place by two screws.just remove the two screws holding cargo lamp housing replace bulb.
0helpful
1answer

2002chevy s-10 third brake light works but not the tailights

you have 2 elements in the bulb. One for turn signal and lights, the other for the brakes. You have a bad bulb that needs to be replaced.
1helpful
1answer

When I turn my lights on, the brake lights stay on even the third brake light. When I turn the lights off and hit the brake pedal the dash lights come on.

ck the bulbs, have any bulbs been replaced recently, could have the wrong bulb installed in the brake light socket.
0helpful
1answer

Both main brake lights are out, third brake light works.

Replace the brake light switch located by the brake pedal. That will resolve your problem
0helpful
1answer

2000 chevy 3/4 ton diesel no brale light but third brake light wo

I just Know that you replaced the bulb ,try a test lite ,make shure it's grounded well poke inside the socket for the bulb this metal socket gives the bulb both electric and a ground ,this is the problem,good luck.
0helpful
2answers

Brake lights not working but third brake light works?

Check your fuse for the brakes, if fuse is blown replace. If not fuse go buy a package of brake light bulbs at the auto store. Then replace the bulbs.

Hope this helps

Matt
0helpful
1answer

How do i replace interior light bulbs, and third brake light bulbs..etc....etc?

most of the interior lights can be replaced by popping off the cover and pulling the bulb. usually there are just a few plastic clips that hold it on. as for the third brake light, there are 2 i believe t16 or t17 star screws that hold the lens on. once you have that off, the rest is obvious.
Not finding what you are looking for?

296 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...