Need serpentine belt routing diagram on a 2000 honda accord lx 4 cylinder

To let you know I found these links with a google search for (2006 honda accord v6 belt diagram)
2003-2007 Honda Accord Serpentine Belt Replacement (2003, 2004, 2005, 2006, 2007) - iFixit Repair Guide
Video on how to change belt. Near the end of video he shows diagram.
How to Replace the Serpentine Belt on a 2003-2007 Honda Accord 3.0L V6 Step-by-Step - YouTube

2003-2013 Honda Accord V6 Accessory/Serpentine Belt Replacement - YouTube

https://www.google.com/search?sxsrf=ALeKk02lTsKtC4FkaLXPemOsjccehu7hhg:1585762938820&q=routing+diagram+for+a+serpentine+belt+for+a+4-cylinder,+93+Ford+Ranger.+The+Ranger+has+A/C+and+power+steering.+Thank+you&tbm=isch&source=univ&sa=X&ved=2ahUKEwjj9qml48foAhWSERQKHQ8uC_gQsAR6BAgEEAE&biw=1473&bih=696

see the following site that I found by googling "2000 honda accord serpentine belt replacement" You will need to know what engine size and whether you have AC.
https://www.google.com/search?q=2000+honda+accord+serpentine+belt+replacement&client=firefox-a&hs=zDs&rls=org.mozilla:en-US:official&tbm=isch&tbo=u&source=univ&sa=X&ei=ylF4UoS5O6zfsAS8oYCgAg&ved=0CFgQsAQ&biw=1280&bih=896

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f803751e1 Click on link to find belt diagrams.

GO TO AUTO ZONE OR ADVANCE AUTO PARTS STORE WILL PRINT YOU BELT ROUTING DIAGRAM FOR FREE.

For the 2000 Chevrolet Tracker:

Most modern vehicles have the Belt Routing Diagrams on the undeside of the Hood. But the sometimes disappear.

I do not know if you have the 1.6L In-Line 4-Cylinder, or the 2.0L DOHC In-Line 4-Cylinder. Nor what Engine Options you have (AC/No AC, etc.).

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/tracker/2000_chevrolet_tracker_drive_belt_routing_diagram.htm

where is the diagram !!!!

1990-95 4-Cylinder Accord and 1992-95 Prelude




On all engines except VTEC, the belt adjuster arm must be locked in place using one of the lower cover mounting bolts




The balancer shaft must be held in position during timing belt installation




Timing belt and components used on the Accord V-6

I hope help you with this. Good luck (remember rated this help).

call a parts store they usually can provide you the routing for serpantine belts good luck getting it right though it can be tricky pay close attention to how the belt is routed :)

While wearing safety goggles and engine switch off.

Your 95 Accord comes with a 2.2L (4 cylinder)
I believe the 2.2L has two belts: power steering and alternator (with or without A/C - different belt applications).
If you are replacing belts note the routing of each one..
. In any case these belts are not easy to replace . Each of the belts has its own manual tensioner. You should have pry bar or lever to push the tensioner back to release the tension on the belt.
There is not a lot of room to work between the pulleys and body of car (the engine is transversely mounted). Slip the belt off any pulley you can reach. Carefully release the pry bar on the tensioner pulley. To replace belt reverse the above step. Do not pinch or crimp the new belt.

You may also want to consider the timing belt also.