2006 Nissan Pathfinder Logo

Related Topics:

A
Anonymous Posted on Dec 26, 2017

Hi, i have a nissan pathfinder 2007 stl turbo diesel,the horn has stopped working, i have check fuses, checked wiring for 12 volts at horns i also shorted out horns they work i also removed the airbab and checked connections all ok,i cleaned the horn contacts,i also replaced the horn relay,any thoughts, steve

5 Related Answers

NismoMaster

Walker

  • 146 Answers
  • Posted on Jul 27, 2009

SOURCE: 2001 Nissan Xterra Horn stopped working.

You should check fuse #32 (15amp) to make sure that it is good. then you should check the horn relay. Remove the relay and check for power source on two of the terminals (terminals 1 and 5). Press the horn button and you should have a ground on one terminal (terminal 2). The fourth terminal (terminal 3) should be power out to the horn. Terminal 4 is unused.

Ad

Anonymous

  • 1 Answer
  • Posted on Dec 10, 2009

SOURCE: My 2002 Nissan Pathfinder's car horn for the alarm stop working.

Just hold the lock and unlock button on your key until you hear the horn again. Then its activated :)

Testimonial: "Excelletn solution, was looking for solution for months, vvg418 is super, can't thank enough."

harryhotrod

  • 30 Answers
  • Posted on Jun 09, 2010

SOURCE: I have 2006 Sentra the

test the horn when disconnected from the wiring loom

Navmesha

Navin Sharma

  • 315 Answers
  • Posted on Sep 12, 2010

SOURCE: My horn stopped working on my 2007 Nissan Versa. I

might be either one.go for the cheapest option first.Or it could be the horn.

duane_wong

Duane Wong

  • 6826 Answers
  • Posted on Dec 15, 2010

SOURCE: horn will not work, I

If you ground out one or the other of the 2 terminals with a test light, the horn should sound.
If not, then the horn is bad, or there is no current going to it.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Lancer 2007 why not work horn

Hi. Check fuse panel for horn. replace with same fuse. Check wires to horn that they are not shorting out. Check with volt meter for 12v to and from horn. Good luck.
0helpful
1answer

2007 Ford Explorer horn quit working?

suggest checking if 12 volts goes to horn wire at horn end when horn pressed from inside vehicle. A 12 Volt probe {google it} can be a cheap checking tool for this.
If 12v volts is switched when button is pressed {could be earth being switched if it is then place probe on constant 12 volts and negative lead on switched earth wire} then the horn itself is faulty.
If no voltage switched then horn relay needs to be checked. check if voltage at horn relay coil contact when button pressed.
if yes then relay may be faulty. if no then horn switch could be faulty.
you can check switched voltage also at horn relay switched contact when relay plugged in. To see if relay is doing what it is meant to do
0helpful
1answer

Horn not working 2007 nissan quest

  1. The horn could be unplugged or the connection could be dirty.
  2. The wires in the leading to the horn could have been damaged.
  3. The fuse could be bad. Check the Owner Manual to see which fuse and check it. Usually the horn is on a fuse with other devices. If the other devices are not working as well, then the fuse is a likely suspect.
  4. Rarely, the horn itself is faulty and needs to be replaced.
0helpful
1answer

The horn of my KIA CArens has stopped working. I suspect something at the push at the steeing wheel. Any help

check horn fuse
measure voltage at horn
one wire will be earthed to car body hopefully and the other wire will get plus 12 volts when the horn is pressed.
or one wire is always 12 volts and the other wire is connected to earth when horn button pressed.
check fire wall of car some kia have horn on firewall in engine compartment. or it is under the grill in front of car.
0helpful
1answer

Horn doesn't work

check fuse first. then check horn itself by powering it with 12 volts externally.

if both are ok, your switch inside your steering wheel to use horn circuit is broken.
0helpful
1answer

My horn is not working from in side my. Pathfinder

beneath the horn on the steering there are press buttons which send current to the horn when u press it.perhaps the wire conection is messed up, first check the horn fuse if its ok then life the steering horn cover and see if u can press them with hand n it works.
0helpful
1answer

My horn on my 2000 Volkswagen jetta vr6 stopped working and i checked all the fuses and they all good. so i need to find out whats the problem.

Try to locate the horn assembly. When you do, disconnect the wires from the horn and connect them to a volt meter. Make sure that the contacts are free of corrosion. Have a person activate the horn while you check to see if there is a 12 volt supply at the meter. If there is power, clean the contacts on the horn and reconnect the wires to their respective locations. Try the horn again. If the horn does not work, replace the horn assembly. Hope this helps.
0helpful
1answer

Horn does not work

Check fuse, if ok have somone use a volt meter while you depress the horn, and see if you are getting 12 volts, if you are not and the fuse is good, then it is the relay, if you have 12 volts to the horn wire, then the horn is bad.
2helpful
2answers

95 range rover horns stopped working relay still clicking?fuse ok

If you have access to a volt meter turn it to dc volts and unplug the horn have some one activate horn while you check the volts. should have around 12volts. If you do its the horn itself.
Not finding what you are looking for?

159 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...