Cars & Trucks Logo

Related Topics:

Jessicaand Robert Schroeder Posted on Nov 01, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

4x4 wont engage when shifter is put in all 4wheel positions drives fine in 2wheel drive

1 Answer

wade dunlap

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Expert 101 Answers
  • Posted on Nov 01, 2013
wade dunlap
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Jul 02, 2009
Answers
101
Questions
0
Helped
30676
Points
298

Can you supply more information? year and model of vehicle, does it have an actual shifter lever or buttons? and what are all the available options to shift into?

If you have a honest mechanical manual 4x4 that you reach down to the floor and shift into 4x4 with a lever, and 4x4 doesnt work you got problems with your transfer case or you got some bent or missing linkages.

if you have a push button system for 4x4, then you could have a number of problems, bad actuator motor, bad wiring, etc.

3 Related Answers

Anonymous

  • 50 Answers
  • Posted on Jun 20, 2008

SOURCE: Shifting in drive from park position

that means the pin that the knob presses down is stuck on something. if you take the shifting panel off it showes everything. then there will be a plastic guide. see what the pin is sticking on and there you are.

Ad

Anonymous

  • 1 Answer
  • Posted on Mar 17, 2009

SOURCE: 2002 kia 4x4 wont go into 4 wheel drive

Hello
A VERY COMMON FAULT!
Kia us a dim design that works on air, so the light on the dash may light up green...mine does...but no 4x4.
Test one, look inside the engine bay,(2Litre petrol) on your left hand side, to the left of the actual engine is the solenoid device that "switches on" the vacuum to the front hubs. This is easier that you would think. If you look at the left side of the engine, there are two pipes coming out (left side) one is thick (break system. DONT touch) one is thinner and soft rubber. Follow this tube, it goes into a small black cannister which is a resvoir and one way valve...the tube then outputs into another device (solenoid) which has 2 wires on. The tube then splits under this in two. The test is simple, with the engine running, and 4 wheel drive engaged pull the tube apart after the solenoid. Put your finger there you should feel a nice strong ****. If it does **** put it back on. If it does not **** it needs to be removed and cleaned. This is simple to unbolt and all you do is pull the rubber bung of the bottom, and the two tubes and spray break cleaner inside. reassamble until you get to feel the vaccum.

test 2 Now look behind each wheel, you will see a thick hose wrapped in a spring, this is the break system, do not touch this. There is a thinner flexible hose attached behind the wheel, you will notice that these have no securing system just push fit. Remove each of the in turn and test for vacuum.

Leaks here are common and easy to fix.

The bad news if you have vacuum, and still no 4 wheel drive one or both front wheel hubs has a leak, and the bad news is, it needs a garage to fix it, and to replace the seal a £5 part you have to ruin a £100 part.

Test the vaccum, pray. Otherwise ask, doe you really need to spend £250 to sort this?

Good luck

raj somaiya

  • 5370 Answers
  • Posted on Nov 25, 2012

SOURCE: will not shift into 4wheel drive

On these issue,there are few solved help links for troubleshooting the issue easily.-------

Click the link below:---
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------
4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------
Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------
4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------
4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------
2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------
2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------
4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------
4x4 will not engage on Ford F150? http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------
Dodge Ram 4x4 light keeps flashing 4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------
Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

I have a 1990 Chevy Suburban 1500 4X4 with a 700r4 and it just will not go in to drive or reverse in 2wheel drive but when in 4wheel drive it moves in drive but it does move at all in reverse. What is...

Transfer case is bad. My first guess. If the transmission were bad it wouldn't move at any position. Is there any noise? You have 4 possibilities, Front and rear differentials, transfer case, and the transmission.
0helpful
1answer

96 explorer disengages 4wh low but does not engage 2wheel

Does it shift to 4wd high range ? If so then shift to 2wd . What is going on here is the transfer case motor is stopping due to the motor position sensor has gone bad which means that you replace the transfer case motor assembly. But if you wish to make it a 2wd for awhile then remove motor and manually turn shaft . This can be done by raising and supporting rear axle truck in park remove motor turn shaft slowly with pliers and rotating the play in drive shaft. There are stamped markings on back of case showing gear positions..
0helpful
1answer

Will not shift into 4wheel drive

On these issue,there are few solved help links for troubleshooting the issue easily.-------

Click the link below:---
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------
4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------
Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------
4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------
4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------
2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------
2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------
4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------
4x4 will not engage on Ford F150? http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------
Dodge Ram 4x4 light keeps flashing 4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------
Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

0helpful
1answer

1996 f150 4x4 e4od automatic stuck in 2nd or limp mode while in 2wheel drive or 4wheel high,when i put it in 4wheel low the transmission shifts in all gears. At fist I was told the transmission was bad,so...

Wow,
That's odd ,push button shift I suppose . Ford doesn't have a 2nd gear limp mode ,I don't think.
Has to be the manual linkage at the shifter,try manually shifting? still no low?
2helpful
1answer

How to engage the 4 wheel drive on a 1991 jeep cherokee

You can "shift on the fly" at up to 45mph - just let off the gas and pull the shifter back to 4hi. DO NOT try going to 4lo while moving.

Another way is to stop, put it in neutral, and pull the shifter back to 4hi or 4lo.

This is vacuum activated - so if you can't get it to engage - the vacuum motor is failed - or you have a disconnected or rotted vacuum line.

Cherokees have the command - track. You'll see a lever next to the transmission shifter that has letters 2H, 4H, N, 4L on it.
You can shift from 2H (2wheel drive high range) to 4H (4wheel drive high range) at any legal speed.
If it's an automatic, I recommend just taking your feet off of both pedals, so there's not a lot of torque being passed thru the transfer case.
If it's a standard I recommend stepping on the clutch when you shift, but it's not necessary.
To go to Neutral just pull the shifter back one more position to the N position. To shift into 4L (4wheel drive lo range) you must be stopped.
I also recommend shifting the transmission into neutral when you do this. Push the shifter to the right, then pull it back.

Thanks!
0helpful
1answer

Auto locks for front 4x4 2007 f150 cant stop grinding noise

Are you under warranty? Make it the dealers problem if its eligible.

If the front hubs are grinding regardless of being in 2wheel or 4wheel drive it can be the hub bearings which turn regardless. If it grinds only when in 4x4 then the wheel shafts or differential or front driveshaft or transfer case is making the noise because all of these parts move when in 4wheel drive.
0helpful
1answer

Truck dont mouve

Ok lets start with is your truck a 4x4 or 2wheel drive? if a 4x4 check to see if your 4wd shifter didn't get knocked into neutral and that it is engaged properly in 2wd mode... if it is a pushbutton check that as well..

Does the Shifter Feel normal you feel it engage? if yes then you know shifter linkage is fine problem lies somewhere else..
Next when did this happen while driving did you hear a bang and then nothing?? maybe you Blew out the rear or boke a driveshaft. or Universal joint? this all will be noisy

or maybe you burned the clutch to the point it melted? it will stink badly and seem to linger forever in the air

has it sounded lateley noisier and noisier if so mabe throwout bearing burned up and broke something under the truck

please respond back with more detail and your findings

good luck


0helpful
1answer

Will not engage into 4wheel drive

Start Vehicle with engine running push on BRAKE and with feet firmly on brake put vehicle in NEUTRAL. Keeping foot on brake try to engage 4x4 should work. If I fixed-ya leave ma FIX-YA comment thanks
0helpful
1answer

2003 Lincoln Navigator will not shift from all 4wheel drive into 2wheel drive

this is common on these trucks just put your witch in 2 wheel and go ahead and drive it will let loos when it sees the correct secquence and drive a little and shift to netural.
just neve do it from high to low range
Not finding what you are looking for?

330 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...