SOURCE: I need to change the
well! investigate first the type of sparkplugs your truck does works with! and get them! find out where are located on your engine, get the proper tool, and if you can reach them with your hands and sight, take them off and put the brand news, learn how to use the tool before before to change them. I don't know the name of this tool on english.
Your job is to investigate this tool and my work is going to the dictionary . Bye. greetings from Mexico
SOURCE: what kind of transmission fluid do you put in a Mitsubishi
Automatic: Mitsubishi Diamond SP-III ATF.
Manual: 75W-90, 75W-85W GL4
SOURCE: Changing transmission filter on Mitsubishi
FIRST YOU HAVE TO UNBOLT THE TRANSMISSION PAN ON THE BOTTOM OF THE TRANSMISSION. THERE WILL BE FLUID IN IT SO BE CAREFUL NO TO SPILL IT. AFTER THE PAN IS OFF YOU WILL SEE THE FILTER ON THE BOTTOM OF THE VALVE BODY. IT MAY BE BOLTED ON AS WELL. HOPE THIS HELPS. LET ME KNOW. GOOD LUCK
SOURCE: HOw to replace spark plug wires on a 1998
Installing New Spark Plug Wires Is Simple, Especially Of One Wire Is Replaced At A Time. Compare The Length Of The Old Wire With The Length Of The New Wire. Replace Each Wire With One Of Equal Length.Make Sure The New Wire Is Fully Attached On The Plug And In The Distributor Or Coil Module.
Spark Plug Wire Replacement Is More Complicated If All The Wires Are Removed At Once.Then You Must Use The Engine Firing Order And Cylinder Numbers To Route Each Wire Correctly.
278 views
Usually answered in minutes!
×