Need car stereo lock code mitsubishi spider eclipse

How to Program a Mitsubishi Key Fob

1. Hold down the lock and unlock button at the same time. The lights will flash three times.
2. Let go of each button.
3. Push the unlock button until the light flashes two times. This will sync the car and your Mitsubishi key fob.
4. Test the key fob to ensure it is functioning as intended.

How to Program a Mitsubishi Key Fob ' Change Key Fob Battery

And for the Security System. Make sure key is in the ignition.

To reset the alarm on the Mitsubishi Eclipse You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This will make the power in the CPU drain, which will force the system to reset itself the next time it comes on.

How to turn off alarm on Mitsubishi Eclipse? - Vehicle History

https://www.google.com/search?q=Mitsubishi+Eclipse+Security+Reset

..

Yes You can just take out the radio and right down the s/n # and or letters, Then take that to the mitsubishi dealer near you and let them look it up. If you bought the car used like i bought mine some one might have put the number on the radio. But you need to take it out to find out.

Go to the dealer and give them your VIN#. They will give you the code.

Disconnect the battery and wait for an hour then reconnect battery

You can get a new key at the dealership, your going to need the ownership and the vin number to the car. They can get the key code to cut a new for you so you don't have to replace all the locks. Good luck and keep me posted.

Write down the VIN and go into a dealership. If you can prove you're the owner (regi. papers, etc), they'll give it to you. If you're on file with any dealership (you've had your Eclipse in there previously), they can give you the code too. If you've had something at a local repair facility done that required the battery to be removed, they should have used a memory saver device/keep-alive device to prevent the radio locking you out. In this case, they kind of owe it to you to call the dealer and get the code (dealerships and local shops usually have a decent relationship with each other, believe it or not).

open the stereo cover and write down the model number, then call the mitsubishi hotline. the'll need the number and your vin. 

unplug you negative cable .

speaker noise in car at all times even with key off,Radio does not work,Goes away when removing radio fuse or power door lock fuse.Does not quit when radio is unplugged including speaker wires.

sounds like the ignition barrel is starting to go the only thing really to do is either wait for it to completely die and then replace it or just replace it now