Water pump how to remove and relpace water pump on 1994 lexus es 300

ECM is located behind the glove box. I hope this helps

REPLACE WATER PUMP.DRAIN THE COOLING SYSTEM.DISCONNECT THE RADIATOR INLET HOSE FROM THE INLET PIPE. REMOVE TIMING BELT FROM THE WATER PUMP PULLEY.REMOVE THE WATER INLET HOUSING AND THERMOSTAT.REMOVE THE MOUNTING BOLTS AND STUDS. LIFT OUT THE WATER PUMP BY CAREFULLY PRYING BETWEEN THE PUMP AND THE CYLINDER HEAD.REMOVEOLD PACKING AND CLEAN THE MOUNTING SURFACES. INSTALL NEW SEAL PACKING TO THE WATER PUMP GROOVE AND NEW O - RING TO THE WATER BYPASS PIPE.INSTALL NEW WATER PUMP TORQUE BOLTS 14 FT LBS.

bad water pump

On 1994 Lexus ES300 3.0L MFI DOHC 6cyl the Thermostat is located under hood, passenger side, upper engine area, engine end of upper radiator hose, mounted in coolant outlet housing, you need to take off this componentes to access this.

Hope helps.

eBay--12.99 !!

http://shop.ebay.com/i.html?_nkw=94+lexus+ES300+key&_sacat=0&_dmpt=Motors_Car_Truck_Parts_Accessories&_odkw=lexus+smart+key&_osacat=0&_trksid=p3286.c0.m270.l1313

check and see if ground wire was removed during front bumper re-installation

to remove fuel pump , its easy, remove rear seats and see for a metal black cap, remove it

it is the computer. send it to auto computer exchange in davie fl they can fix it.

PLEASE TAKE IT TO UR LEXUS DEALER AND LET THEM FIX IT ONCE IF IT HAPPENS AGAI DUMB THE CAR

well, if you thik about to change the fuel pump maybe resolve the problem,remove rear seat bottom then remove the gray cap and disconnect de wire to access to pump