Want to replace fron in 93 ford probe

FIRING ORDER FOR ENGINES 2.0L 2.2L IS 1 3 4 2 FIRING ORDER FOR ENGINE 2.5L IS 1 2 3 4 5 6 FOR THE 3.0L ENGINE FIRING ORDER IS 1 4 2 5 3 6

1993 Ford Probe 2.5 liter DOHC V-6:

Hello difelice5: My name is Roger and I will help with your answer. The correct fire order is 1-2-3-4-5-and 6. I also attached a picture of cylinder reference and the correct fire order in the cap. Should you need further help please just ask. Please rate the answer as this way I know it was helpful. Thank You for using Fix Ya. Roger

LOOK LIKE LOW COMPRESSION IN OTHER CYLINDERS.HEAD GASKET LEAKING.

check the plug s and the wirers if thier bad thats a start also if it coils check them and the distributor

ran it without oil stoped shut it off now it wont start it cranks all day but dont start

waterpump to be replaced is honestly cheaper to do it urself with a haynes manual then to pay a shop to have done trust me i got a quote of 700 for just the waterpump its only a couple hour job aslong as u dont mess up the timeing

Haynes repair manual #61042. I bought one for mine and it covers everything. Lee

have you replaced the ignition switch? not the key cylinder but the actual electrical switch, they are prone to this type of failure, pull the covers off the steering column and test the switch.

for the 1993 probe i could only find a 2.5 V6. there are two banks of cylinders, odd and even. in other words as you stand in front of the vehicle the odd bank is toward the firewall, the even bank is closest to you.
the number one cylinder is on the passenger side toward the firewall and firing order is 1-2-3-4-5-6. hope that helps