If light does not come on when key is in the "on" position, then first suspect a bad buld in the instrument panel. Find the oil pressure sending unit and ground the wire goin to the unit and see if light comes on (assuming the the bulb is good) if it does then the sending unit is defective. Replace the sending unit and retest.
Hope this helps.
SOURCE: Ballast Resistor re-wiring '87 dodge Ram 50
I have just wired the ballast to the coil on my 84 D-50 all but two wires...is yours fixed yet or still need help?
SOURCE: I have a 1987 Dodge Ram 50 sport 2.6 litre the
You have to remove the oil pan - harmonic balancer - timing cover to replace timing chain... to replace cylinder head gasket and not the chain -- you need an assistant to hold the camshaft gear with chain on it. Suspending it with wire to keep the chain from moving the timing (do not let the chain relax as it will come off the crankshaft gear and change the timing)
134 views
Usually answered in minutes!
×