I have a 97 Pontiac Sunfire 2.2 cubic. I need a diagram for installation for a serpentin fan belt.. If anyone could please help me i would really appreciate it..Thanks Bob

Pretty pictures here :>)

https://www.google.com/search?q=1996+Pontiac+Sunfire+serpentine+belt+diagram&tbm=isch&ved=2ahUKEwiZzurM_PryAhWynnIEHb9vAT4Q2-cCegQIABAA&oq=1996+Pontiac+Sunfire+serpentine+belt+diagram&gs_lcp=CgNpbWcQAzoFCAAQgAQ6BAgAEBg6BAgAEB5Q1EdYvqcBYP2yAWgAcAB4AIABkAGIAd8OkgEEMTkuMpgBAKABAaoBC2d3cy13aXotaW1nwAEB&sclient=img&ei=0MA-YZmmE7K9ytMPv9-F8AM&bih=937&biw=1920&rlz=1C1QJDB_enCA643CA644

..

Sure will.Here's a link on how to replace.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?fromSearchPage=true&pageId=0900c1528003ca13&partName=Belts&partId=0900c1528003ca13 Here are the belts.http://www.autozone.com/autozone/parts/1997-Pontiac-Sunfire/Belt/_/N-j96blZ8gcul Here's a tensioner in case you need one.http://www.autozone.com/autozone/parts/1997-Pontiac-Sunfire/Belt-Tensioner/_/N-j96blZ8gdap

Disconnect the negative battery cable with a ratchet and socket, read the serpentine belt routing diagram located under the hood, then release the serpentine belt tensioner using a ratchet and socket, and carefully remove the serpentine belt from all of the pulleys with your hands. 2 Install the new belt according the routing diagram, then ease the belt onto the belt tensioner pulley and tighten the tensioner with a ratchet and socket.3 Reconnect the battery cable and start the car to test the belt.

There may be a diagram imprinted on fan shroud. There is a belt tensioner that tightens the belt. Also when installing belt be sure you have grooved part of belt riding on grooved pulleys. And flat side of belt riding on flat sided pulleys.

go to http://autorepair.about.com/popular.htm and click on serpentine belt inspect . you may see your diagram there or get an idea how it goes. it is really not too hard. If this helps I would appreciate a thumbs up fixya.

10171018 <-part # for a belt routing label.
there should already be a belt routing label under the hood or on your core support with a picture :}

email me at [email protected] and i will send you the diagram

this is normally located under the hood next to the hood release lever if it is missing from yours then try www.autozone.com or go to your local Pontiac dealership in the parts department or an auto parts store like Napa or Autozone

go to autozone.com and it will give you the belt diagram

i have a 97 sunfire with a 2.2 and a/c my sticker is intact would you like a pic?